2EDG KM 5.0mm 5.08mm Pluggable PCB Terminal Block — 300V 15A Plug-In Connector
2EDG / KM 5.0mm & 5.08mm Pluggable PCB Terminal Blocks — 300V/15A Standard Industrial Plug-In Connectors
The 2EDG/KM 5.0mm and 5.08mm pluggable PCB terminal blocks are the most widely used pluggable terminal block pitch in industrial automation, combining the global standard 5.08mm (0.2") pitch with the plug-in/plug-out serviceability of the two-part connector system. Rated at 300V and 15A, these are the go-to choice for industrial control panels, power distribution boards, motor drives, and automation equipment where both high current capacity and PCB serviceability are required. The 5.08mm pitch aligns with standard 0.1" PCB grid layouts, simplifying PCB design.
Key Technical Specifications
- Pitch: 5.0mm and 5.08mm (0.2")
- Rated voltage: 300V
- Rated current: 15A
- Wire range: 22–12AWG (0.5–2.5mm²)
- System: Two-part pluggable (male PCB header + female wire plug)
- Pin count: 2P to 12P
- Certifications: CE, RoHS
Ideal Applications
- Industrial automation panel power and control wiring with plug-out PCB maintenance
- VFD and servo drive control board field connections
- Solar inverter and energy storage system PCB power terminals
- Industrial IoT and edge computing gateway field wiring
- HVAC and building management system controller power connections
Frequently Asked Questions
Q: What is the difference between 2EDG 5.08mm and fixed KF128-5.08mm terminal blocks?
A: 2EDG 5.08mm is a two-part pluggable system — the male header is soldered to the PCB and the female plug (with wires) can be removed without tools. KF128-5.08mm is a fixed single-piece terminal block where wires must be disconnected to remove the PCB. Choose 2EDG for serviceability; choose KF128 for lowest cost.
Q: Are 5.0mm and 5.08mm pluggable blocks interchangeable?
A: No. 5.0mm and 5.08mm have different PCB footprints. Verify your PCB footprint before ordering. 5.08mm is recommended for new designs.
