CINO F680 F780 & 9010E USB Scanner Cables
2m USB data cables for selected barcode scanners
This collection contains two straight USB replacement-cable listings for specific barcode scanner models. One is a two-cable pack for CINO F680 and F780 scanners. The other is a single-cable listing for scanners identified by the model numbers 9010E, 9260 and 9360.
The current range does not include Intermec scanner cables, RS232 cables, USB-C cables, keyboard-wedge cables, power adapters, charging cradles, batteries, mounts, holsters or protective cases.
Products in this collection
- CINO F680/F780 USB cable: a two-piece pack of straight 2m USB data cables, described with a modular scanner-side connector and a USB host connection.
- 9010E/9260/9360 USB cable: a straight 2m USB data cable sold as a single piece. The available product information identifies the scanner models but does not establish a scanner brand, so compatibility should be confirmed from the existing cable and device documentation.
How to select the correct cable
- Match the complete scanner model: use the model printed on the scanner label. F680, F780, 9010E, 9260 and 9360 are separate compatibility references, not interchangeable model families.
- Confirm a USB host interface: both current products are USB data cables. They should not be ordered as substitutes for RS232, PS/2, Ethernet or charging cables.
- Inspect the scanner-side connector: compare the contact count, latch, keying and plug orientation with the existing cable. A modular plug that looks like RJ48 or RJ50 does not prove an identical pinout.
- Check pack quantity: the F680/F780 listing is a two-cable pack; the 9010E/9260/9360 listing is sold as one cable.
- Verify scanner configuration: the scanner must support the required USB host mode. Follow its model-specific programming guide if interface setup is needed.
Connector and compatibility boundaries
The product sources use both RJ48 and RJ50 wording. These names are not treated here as proof of a universal scanner connector. Similar modular housings can differ in contact count, wiring, shielding, power assignment and data protocol. Match the exact scanner model and, where possible, the old cable reference or wiring documentation.
The CINO cable is described as made by E-Simpo and not by CINO. Both products are sold by Yoeruyo as third-party replacement cables. Brand and model references identify the intended devices; they do not establish original-equipment status or equivalence to every manufacturer cable.
Stated physical details
- Straight cable format
- Nominal length: 2m, approximately 7ft
- USB host interface
- Shielded construction described with copper conductors and PVC insulation and jacket
These details apply to the current listings only. No universal certification, temperature rating, flex-life rating or cross-brand compatibility is claimed.
Frequently asked questions
Are these cables for Intermec scanners?
No Intermec model is identified in either current product listing. Do not order them for an Intermec device without independent connector and pinout verification.
Does the F680/F780 listing include one or two cables?
It is described as a two-piece pack of 2m USB cables.
Is the 9010E/9260/9360 cable a CINO cable?
The available product information does not identify its scanner brand. Compatibility is limited to the stated model references and should be checked against the device and old cable.
Can a similar-looking modular connector confirm compatibility?
No. Contact count, latch geometry, pinout and interface electronics must also match.
Do these cables include a power adapter?
No. The current listings are USB data cables only and do not include an external power adapter.
