USD

L6.2mm 2-Pin Tamiya-Style Connector Kits

This collection currently contains one 6.2mm-pitch, 2-position male-and-female connector kit in a Tamiya-style housing format. It is offered in 5-set and 10-set package options for assembling detachable two-wire connections.

The product includes plastic housings and metal contacts as pictured. It is not supplied as a pre-wired harness, and the current listing does not provide 1–12-pin choices, sealed variants or secondary-lock options.

Current Product Configuration

Nominal pitch: 6.2mm
Circuit count: 2 positions
Connector form: male and female plug/socket set
Components: housings and crimp contacts
Package options: 5 sets or 10 sets
Listed brand: Yoeruyo

What “Tamiya-Style” Means

Tamiya-style describes a recognizable two-pin power-connector shape used in hobby equipment, motors, battery leads and repair wiring. It does not guarantee interchangeability with every standard, mini or reverse-polarity Tamiya connector. Compare physical size, pitch, keying, contact gender and polarity before ordering.

How to Select and Verify

Confirm that the existing connector has two positions and approximately 6.2mm contact-center spacing.
Compare the housing outline, polarization ribs, latch shape and mating-face dimensions.
Check which housing contains the male and female metal contacts; housing gender terminology can vary.
Verify the terminal crimp range against the conductor and insulation diameters.
Confirm whether 5 or 10 complete mating sets are required.
Test one assembled pair for retention, continuity and polarity before connecting a motor, controller or battery.

Crimping and Assembly

Use a crimp tool suitable for the supplied open-barrel contacts. Form the conductor and insulation crimps separately, perform a pull test, and insert each terminal in the correct orientation until retained. Check that no conductor strands are exposed and that contacts do not back out during mating.

Polarity and Battery Safety

Connector shape and housing color do not define polarity. Tamiya-style wiring may be reversed between devices or replacement leads. Confirm positive and negative positions with a meter before energizing. A reversed battery connection can damage equipment, overheat wiring or create a fire risk.

Environmental and Electrical Boundaries

The current product does not show interface seals, wire seals or documented IP testing. Treat it as an unsealed connector and do not describe it as waterproof or IP67. No verified collection-wide 15A, 250V, AWG 20–14, temperature, plating, UL94, CE, RoHS or OEM-compatibility rating is established by the available product information.

Current capacity depends on the exact terminal, conductor, crimp quality, mating resistance, ambient temperature and duty cycle. Independently qualify the finished connection for automotive, battery, high-vibration, outdoor, marine, mains-adjacent or safety-critical use.

Typical Uses

After confirming dimensions, pinout and electrical capacity, the kit may be considered for detachable connections in hobby motors, RC equipment, battery-powered projects, prototypes and general two-wire repairs. The product title’s automotive application field does not prove vehicle-specific fitment or under-hood qualification.

Frequently Asked Questions

Is this connector waterproof?
No. The product shows no sealing components or verified IP rating.

Does the kit include wire?
No pre-wired cable is identified; the listing describes housings and contacts.

Are multiple pin counts available?
No. The current product is a 2-pin connector.

Will it fit every Tamiya battery connector?
Not automatically. Check standard versus mini size, housing geometry, contact gender and polarity.

Is it rated for 15A?
No verified 15A rating is established. Validate the assembled connection for the intended load.

Ordering Checklist

Confirm 6.2mm pitch, two-position housing, mating geometry, contact gender, wire size, polarity, environmental exposure, package contents and quantity. Assemble and test a sample before operational use.