PH2.0mm Wire-to-Board Connectors – JST PH Series Compatible
PH2.0mm Wire-to-Board Connectors – Compatible with JST PH Series
Yoeruyo's PH2.0mm connector range provides compact, reliable wire-to-board interconnection at the 2.0mm pitch, fully compatible with the JST PH series — the most widely used 2.0mm pitch connector in consumer electronics, development boards, robotics, drones, and IoT devices. The PH2.0mm system is the standard connector for LiPo battery packs in RC vehicles and portable electronics, and is universally recognized in the Arduino, Raspberry Pi, and maker communities as the go-to compact wire-to-board connector.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Pitch | 2.0mm |
| Circuit Count | 2 to 16 circuits (single row) |
| Wire Range | 0.08mm² – 0.33mm² (AWG 28–22) |
| Rated Voltage | 100V AC/DC |
| Rated Current | 1A per contact |
| Contact Material | Copper alloy, gold plated over nickel |
| Housing Material | PA66 (Nylon 66), UL94 V-0, natural or black |
| Operating Temperature | -25°C to +85°C |
| Locking | Positive latch with audible click |
| Mating Cycles | ≥30 cycles |
| Compliance | RoHS, REACH |
Product Components
- Wire-side housing (plug) – single-row receptacle housing accepting PH2.0mm crimp terminals; 2 to 16 circuits
- PCB header – vertical (through-hole) – straight PCB-mount header for wave or hand soldering; compatible with PH2.0mm housing
- PCB header – right-angle (through-hole) – 90° orientation for edge-mount and space-constrained PCB layouts
- SMD PCB header – surface-mount reflow-solderable header for automated PCB assembly
- Crimp terminals (female) – gold-plated copper alloy socket terminals for crimping onto AWG 22–28 wire
- Pre-crimped wire assemblies – custom wire-to-board assemblies with specified wire length, gauge, and circuit count for OEM and maker integration
Application Scenarios
- LiPo & Li-ion battery packs – the PH2.0mm (JST PH) is the standard connector for 1S–6S LiPo battery packs in RC vehicles, drones, and portable electronics; universally recognized as the “JST connector” in the RC and maker communities
- Development boards & Arduino – wire-to-board connections on Arduino Nano, Pro Mini, ESP32, STM32, and custom MCU boards; compatible with Adafruit, SparkFun, and Seeed Studio board JST PH connectors
- IoT sensors & modules – compact wire-to-board connections for temperature, humidity, CO₂, and motion sensors in IoT and smart home devices
- Robotics & drones – motor signal wiring, sensor connections, and battery connections in miniaturized robotic platforms and micro UAVs
- Wearables & medical devices – compact wire-to-board connections in fitness trackers, smartwatches, and portable medical monitoring devices
- Consumer electronics – internal wire-to-board connections in portable speakers, wireless earbuds, and compact smart home devices
Why Choose Yoeruyo PH2.0mm Connectors
- ✅ JST PH series compatible – dimensionally compatible with JST PH 2.0mm housings and PCB headers for drop-in replacement and system expansion
- ✅ Gold-plated contacts – gold over nickel plating ensures low contact resistance and long-term reliability in high-cycle applications
- ✅ Universal maker standard – the PH2.0mm is the most recognized compact connector in the Arduino, Raspberry Pi, and maker communities worldwide
- ✅ Bulk & OEM supply – flexible MOQ and tiered pricing for electronics manufacturers, RC hobby distributors, and system integrators
- ✅ RoHS & REACH compliant – halogen-free materials meet EU and global environmental standards
Buying Guide – Selecting the Right PH2.0mm Component
- Circuit count – 2-pin for LiPo battery power; 3-pin for servo and sensor connections; 4–16 pin for multi-signal and data bus applications
- Wire gauge – PH2.0mm terminals accept AWG 28–22 (0.08–0.33mm²); AWG 26–24 is most common for LiPo battery leads and sensor wiring
- PCB header orientation – vertical for standard wire-to-board connections; right-angle for edge-mount and space-constrained PCB layouts; SMD for automated assembly
- Pre-crimped assemblies – for LiPo battery replacement and maker projects, pre-crimped wire assemblies with the housing installed are the fastest integration option
- Compatibility check – verify housing and header dimensions match JST PH series before ordering for drop-in replacement on existing boards
Frequently Asked Questions
Is PH2.0mm the same as the “JST connector” used on LiPo batteries?
Yes. The JST PH 2.0mm 2-pin connector is universally known as the “JST connector” or “JST battery connector” in the RC and maker communities. It is the standard power connector for 1S LiPo battery packs used in micro drones, RC cars, and portable electronics. Our PH2.0mm 2-pin housings and terminals are direct replacements.
Are these compatible with Adafruit, SparkFun, and Seeed Studio boards?
Yes. Adafruit, SparkFun, Seeed Studio, and most Arduino-compatible boards use JST PH 2.0mm connectors for battery and sensor connections. Our PH2.0mm housings and PCB headers are dimensionally compatible with these boards.
What wire gauge is recommended for LiPo battery leads?
For 1S LiPo battery leads (up to 1A continuous), AWG 26–24 (0.13–0.20mm²) is standard. For higher-current applications, use AWG 22 (0.33mm²) — the maximum wire gauge for PH2.0mm terminals.
Do you offer pre-crimped wire assemblies for LiPo battery replacement?
Yes. Pre-crimped PH2.0mm 2-pin wire assemblies are available in standard lengths (100mm, 150mm, 200mm) and custom lengths for LiPo battery lead replacement and maker projects. Contact us for specifications and bulk pricing.
Do you offer bulk pricing for electronics manufacturers and RC distributors?
Yes. Yoeruyo offers tiered pricing for orders of 500 units or more. Contact us for volume quotations, mixed-SKU orders, and OEM packaging options for production line integration.
