SPECIFICATIONS

Application: L298N

Brand Name: FSXSEMI

Choice: yes

Condition: New

Dissipation Power: L298N

High-concerned chemical: none

Operating Temperature: L298N

Origin: Mainland China

Package: Module

Supply Voltage: L298N

Type: Module

is_customized: Yes

semi_Choice: yes

Principle Overview:

The H-bridge module gate circuit, motor reversing combination with MOS transistors, braking and speed control. Both have similar large output current L298 flexible logic control signal.

Interference approach: control signal optocoupler isolation, power spike voltage suppression.

Control signal logic: L298 using gates to achieve a similar control logic.

H-bridge Method: Use P, N complementary MOS transistors to achieve the H-bridge.

Power voltage protection: Use reset chip undervoltage protection.

Features:

The dual H-bridge

Rated 7A / Road

Optocoupler isolation

Undervoltage protection

extremely small size, only 5.5x5.5cm

Support voltage 7V ~ 24V, undervoltage protection

Dual motor interface, each rated output current 7A

L298 similar control logic, each supported by three-wire control is enabled, reversing and braking

enable signal to an external PWM, reversing limit switch control signal can be connected in series

control signal sink drivers, support the vast majority of single-chip direct drive

Use optocoupler isolation for all control signals

electrostatic discharge circuit

Specifications:

Input voltage range: DC 6.5V ~ 27V

Rated input voltage: DC 12V / 24V

Output channels: 2-way

Rated output current per channel: 7A

Peak output current per channel: 50A

Each rated output power: 84W (12V supply) 168W (24V power supply)

The control signal voltage: 3 ~ 6.5V

Each control signal current: 3 ~ 11mA

The minimum effective PWM pulse width: 5us

Working temperature: -25 ℃ ~ 80 ℃

Dimensions: 5.5x5.5x2.0cm

Installation hole diameter is 3mm, suggested the use of M3 screws to fix.

Note that when you install, do not let the back of a short circuit, you can add insulation pad or use Tongzhu raise the board.

Package Included:

1 x 12V/24V 7A 160W DC Motor Driver Module