SPECIFICATIONS

42GP‑775 12V 24V high torque low rpm dc motor

42mm all metal planetary reduction gear motor for rc model
reversible brushed planetary gear motor for automatic machinery
low rpm high torque dc gear motor 42GP‑775
diy robot 42mm planetary dc geared motor 12v 24v

Note: Please note the voltage and no-load speed you need when taking the picture for us to ship. Thank you!

Without any notes or contact, we will randomly ship the goods

Product picture :

High speed electric engine with metal gearbox

Small electric dc motor with gearbox

42mm dc planetary gear motor
high torque brushed dc gear motor
12V 24V reduction gear motor
metal planetary gearbox motor

42GP‑775 planetary gear motor

planetary stepper gear motor

multiple gear ration

Factory support the customization service

Related motor

dc gear motor with high torque gearbox character:

42GP‑775 42mm DC Brushed Planetary Gear Motor, 12V 24V, all‑metal gearbox, high torque reversible low RPM reduction motor, ideal for RC model, automatic machinery and DIY robot projects.
5‑7 Bullet Point ，。

mini gear motor with low speed application :

Main uses: smart locks, gaming devices, fingerprint locks, shared bike locks, toys, electric devices, medical devices

How to select dc gear motor

Precautions for motor use:

1. Make sure the voltage of the motor is correct before use. If it is a DC motor, also confirm whether the power supply current is sufficient

2. It cannot be used with overload. The reasons for overload are mainly divided into two parts, the torque and the force of the shaft. The load torque cannot exceed the rated torque of the motor, and the force of the shaft cannot exceed the axial and radial allowable forces of the shaft. After the load is applied, the measured current of the motor cannot exceed the rated current. Generally, the motor must be equipped with a fuse to avoid overloading and burning the motor.

3. Do not store or operate in a high temperature or humid environment, and do not place it in corrosive gas, which will reduce the effect of the motor.

4. When assembling transmission parts such as gears and pulleys on the motor shaft, do not beat abnormally when pressing in

5. When soldering on the positive and negative motor terminals of the power supply, the temperature of the soldering iron should be 340 ° C ± 40 ° C, and the heating time should not deform the plastic within 3 seconds. During work, let the solder point flow into the motor or break the end of the wire,

6. When installing the motor, pay attention to whether the screws are too long, and prevent the excessively long screws from pressing against the parts inside the motor