6/8CH Wireless Remote Control Switch AC 220V 100V-265V 10A Relay 6/8 Channels 433MHz Industrial Controller Receiver Transmitter

6/8CH Wireless Remote Control Switch AC 220V 100V-265V 10A Relay 6/8 Channels 433MHz Industrial Controller Receiver Transmitter

$118.68

$118.68 $0.00

Description

SPECIFICATIONS

6CH Operating Voltage: AC 100-265V

8CH Operating Voltage: AC 85-220V

Brand Name: NONE

Choice: yes

Coding Type: Learning code

EU LVD Voltage: High voltage: Above 50Vac or 75Vdc

High-concerned chemical: none

Max Curren: 10A

Model Number: Wireless Remote Control Switch

Module Sensitivity: -105dBm

Origin: Mainland China

Voltage: 110-240V

6/8 Channel Wireless Remote Control Switch

Wide range of uses

Mainly used in garage door control, electric doors, windows, lighting control, electric door, remote control curtains, lifting equipment, motor control, water pump, gates, lifts, industrial control, projection screen elevator control and security industry and other fields, is easy to install, use the advantages of simple and safe and reliable.

About Receiver:

Channel: 6CH or 8CH
Radio Frequency: 433MHZ
Operating Voltage:
6 Channels AC 100-265V
8 Channels AC 85-220V
(110V 220V all is ok )
Coding Type: Learning code
Maximum Working Current: 10A
Quiescent Current: less than 10mA
Receiving Sensitivity: more than -105dBm
Working Temperature: -40'C - +80'C
Case Size: 90*115*40mm

Working models.

A.Momentary learning method
Press the programming button of the controller about 1-2 seconds , Then press the remote transmitter button 1 unti you heard the “BB” sounds from ON to OFF, learning is successful.

B.Latched learning method: press the remote transmitter button 2 to programming.

C.Toggle learning method:press the remote transmitter button 3 to programming.

D:Change button 4/5/6 (4/5/6/7/8)buttons to programming to get different mix working models.

Delete code:

Press and hold programming buttons 8 seconds..All previously paired remotes are cleared.Before programming,Please delete code first.

8 Channels Receiver

6 Channels Receiver

About Transmitter:

Buttons: 6 Buttons or 8 Buttons
Working Voltage: 9V (battery not included)
Frequency:433MHz
Remote Control Distance: 50-200m
Encode: Fixed code by soldering and learning code

About Learning and cleaning Method:

Learning: Press the learning key, it means the controller putting in the learning state when the indicator goes ON, then please press any buttons of the remote control to transmit signals, the indicator will flash for 3 times after 1 second, then recover to normally OFF, which means successfully studied.
After pressing any buttons of the remote control to transmit signal, the indicator didn't flash, 10 seconds later it still recovers to normally on, but it study unsuccessfully.
Cleaning: Hold press learning button about 8 seconds, indicator from ON to OFF, then press remote receiver did not work, it means cleaning code successful.

A: Signal non-lock (jog): press the NO.1 button of the remote control to learn
B: Signal self-lock (self-lock): press the No.2 button to learn, each channel is independent of the others
C: Signal inter-lock: press the NO.3 button to learn
D: 1CH-3CH is jog, 4CH-6CH is self-lock press the NO.4button to learn
E: 1CH-3CH is jog, 4CH-6CH is inter-lock press the NO.5button to learn
F: 1CH-2CH is jog, 3CH-6CH is inter-lock press the NO.6 button to learn

Pay attention:

The default setting of output way is momentary, press is on, release is off.

Package included:

1 x 6CH/8CH Remote Control Switch
1 x Transmitter