AC85-250V TDL-1918 5.8G Microwave Radar Sensor Switch Fully Automatic Induction Microwave Detector Radar Switch

Product Overview:

When someone walks into the sensor and reaches the lighting demand, the microwave switch is automatically turned on, the load appliance starts to work, and the delay system is activated. As long as the human body does not leave the sensing area, the load appliance will continue to work. When the human body leaves the sensing area, the sensor starts to calculate the delay. When the delay ends, the sensor switch is automatically turned off, and the load appliance stops working. Truly, safe, convenient, intelligent, and energy-saving.

Two product features:

1. Sensitive sensing, accurate identification of the movement of biological and non-biological bodies, to minimize the rate of misoperation.

2. Strong anti-interference: 5.8GHz working frequency is adopted, which is less affected by natural external factors, and its performance is stable and reliable.

3. Automatic metering: Automatically identify the strength of the ambient light, and the light will turn on when the lighting requirements are reached and there are people. Otherwise it will not light up.

4. Fully automatic induction: automatically turn on the light after sensing a person, when the person comes, the light is on, and the light is off, safe and energy-saving, free from external influences such as sound and objects.

Technical Parameters:

Product model: TDL-1918

Working voltage: AC85-250V

Standby power consumption: 70mW

Transmitting power: <10mA

Working frequency: 5.8GHz

Induction distance: 2-16 meters (adjustable)

Working delay: 10 seconds to 30 minutes adjustable

Light control illuminance: 5-500LUX adjustable

Load power: 800W (resistive load) 200W (capacitive load)

Four matters needing attention:

1. When installing, please disconnect the power and install again to avoid danger

2. The product is not waterproof, please pay attention to moisture and waterproof.

3. The microwave induction angle is 360 degrees, please pay attention to the installation method.

4. Non-professionals do not disassemble or assemble the high voltage inside the product, otherwise, you will be responsible for the consequences.

Checklist

1*Microwave radar switch