Keyestudio CH340 Chip Nano Plus Board Mini USB Type-C Cable Compatible With Arduino NANO With ATmega328P-AU For Arduino Kit

Keyestudio CH340 Chip Nano Plus Board Mini USB Type-C Cable Compatible With Arduino NANO With ATmega328P-AU For Arduino Kit

$44.52

$44.52 $0.00

Description

SPECIFICATIONS

Application: CH340 Nano Controller Board

Brand Name: keyestudio

Choice: yes

Condition: New

Digital I/O Pins: 14 (D0-D13) (of which 6 provide PWM output)

High-concerned chemical: none

Input Voltage (recommended): DC7-12V

Microcontroller: ATmega328P-AU

Operating Temperature: 0-40

Origin: Mainland China

Package: DIP

Supply Voltage: DC7-12V

Type: Voltage Regulator

3keyestudio Nano ch3404115371908985779

keyestudio Nano ch340 Mini USB

Introduction:

The processor core of Keyestudio Nano CH340 is atmega328p-au. It is as same as the official Arduino Nano in addition to driver file and USB to serial chip (CH340G). It also has a 14 digital input / output interfaces (6 of which can be used as PWM output), 8 analog input interfaces, 1 16MHz crystal oscillator, 1 mini USB port, 1 ICSP interface, and a reset button.
The ICSP interface is used to burn firmware to Atmega328P-Au. Since this chip we burn firmly in front of the factory, it is generally not available. When using the Mini USB cable, we can use the VIN GND (DC 7-12V) to power.
What’s more, you can burn the firmware for Atmega328P-Au through the built-in ICSP port. The firmware of this chip is burnt well before delivery, therefore, you don’t need to burn the firmware.
The power can be supplied through USB cable, port 5V , GND（DC 5V), as well as Vin GND (DC 7-12V).

Resource Links

https://fs.keyestudio.com/KS0173

Keyestudio NANO PLUS with Arduino NANO(Black and Eco-friendly) Type-C USB

Description:

The processor core of Keyestudio NANO PLUS is ATMEGA328P-AU. It is as same as the official Arduino Nano in addition to driver file and USB to serial chip (CH340G).

It also has 14 digital input / output interfaces (6 of which can be used as PWM output), 8 analog input interfaces, 1 16MHz crystal oscillator, 1 mini USB port, 1 ICSP interface and a reset button. The ICSP interface is used to program the Atmega328P-Au. We can supply power with a type-CUS cable or the port VIN GND (DC 7-12V)

Specification:

Microcontroller: ATMEGA328P-AU
Operating Voltage: 5V
Input Voltage (recommended): DC 7-12V
Digital I/O Pins: 14 (D0-D13)
PWM Digital I/O Pins：6 (D3 D5 D6 D9 D10 D11)
Analog Input Pins: 8(A0-A7)
DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM:2 KB
EEPROM: 1 KB
Clock Speed:16 MHz
LED_BUILTIN:D13

Download the Driver of CH340

https://fs.keyestudio.com/CH340-MAC

How to Install teh Driver of CH340

Please refer to the following link: https://wiki.keyestudio.com/Download_CH340_Driver_on_MAC_System