LED Light Closet 1M-5M with PIR Motion Sensor Night Light 12V 2835 LED Strip for Kitchen Bedroom Bathroom Stair Smart Lamp

LED Light Closet 1M-5M with PIR Motion Sensor Night Light 12V 2835 LED Strip for Kitchen Bedroom Bathroom Stair Smart Lamp

$87.93

$87.93 $0.00

ColorEU Plug

Emitting Color White Warm White

Description

SPECIFICATIONS

Average Life (hrs): about 50000H

Brand Name: CHNAITEKE

Certification: ce

Choice: yes

Color Temp(K): White/Warm White

High-concerned chemical: none

Is Batteries Included: no

Is Smart Device: no

Item Type: Strip

LED Chip Model: SMD2835

LEDs Number/M: 60leds/M

Luminous Flux: 249-2000

Model Number: Motion Sensor LED Strip Light

Nominal Voltage: 12V

Occasion: Bedroom

Origin: Mainland China

Power Consumption (W/m): 2.88W/m

Power Generation: Motion

Power Source: DC

Specifications (light beads / m): 60

Strip type: SMD

Voltage: 12 V

Waterproof: Yes

1M-5M LED Light Closet with Motion Sensor PIR Night Light 12V SMD LED Strip Lights for Kitcen Bedroom Bathroom Stair Smart Lamp

Note: The motion sensor only works in the dark.

Specifications:
Type: 12V LED Strip With Motion Sensor and 2A Power Adapter
LEDs Type: 2835SMD
Light Color: White / Warm White
Color Temperation: White (6000k-6500K); Warm White (2700K-3500K)
Sensing Distance: 1m - 3m
Time-Delay: 10sec-5min (adjustable)
LED Strip Length: 1M/2M/3M/4M/5M
LEDs QTY: 60leds/M
Waterproof Grade: IP65

Notes:
1.Connect the power adapter, the led tape will light twice automatically.
2.Light control mode: This item Just work at night or dark environment.
3.Because this light is waterproof, the light is brightness, so warm white of color temperature value is high (Note: It is not what you think of warm white)
4.If the strip light doesn't sensor function, please check the installation interface port carefully.
5.If you mind this,do not place order. thank you for understand.

Note: The sensor of this lamp bar can adjust the extinguishing time of the lamp bar (there is a gear knob on the sensor to adjust the extinguishing time). If it is found that the lamp bar does not go off for a long time after people leave, it may be because the sensor has been adjusted for a long extinguishing time. At this time, you only need to adjust the gear knob to the desired time. (Delay time is 10s-5min)