SPECIFICATIONS

Brand Name: diymore

Choice: yes

Material: Polymer

Origin: Mainland China

Output: Switching Transducer

Theory: Hall Sensor

Type: Gas Sensor

Use: Gas Sensor

is_customized: Yes

semi_Choice: yes

Product Features:

Small and compact product

With power indicator light

Service life: greater than 100000 times

Equipped with anti reverse connection protection, the reverse connection of the power supply will not burn the board

Capable of controlling equipment with AC voltage up to 220V10A or DC voltage up to 30V10A

Function Description:

This module can detect the concentration of smoke, and can set one smoke detection threshold during use. When the smoke sensor detects that the ambient smoke concentration is greater than the set smoke threshold, the relay closes and the alarm indicator light lights up, and the buzzer sounds an alarm prompt. When the smoke sensor detects that the ambient smoke concentration drops below the set smoke threshold, the relay disconnects and the alarm indicator light goes out, and the buzzer stops alarming.

Reference description:

Working voltage: DC5-30V.

Output capacity: It can control devices within 220V10A AC or 30V10A DC.

Static current: 20mA,

Dynamic current: 50mA.

Equipped with anti reverse connection protection, the power supply reverse connection will not burn the board.

Service life: over 100000 times, working temperature: -40--85C

Board size: 49 * 45 * 20mm,

Positioning holes: with a spacing of 44mm in length and 40mm in width, and an aperture distance of 2 5mm, aperture 3mm.

[1] Alarm buzzer

[2] Status indicator light, indicator light on, buzzer alarm, and relay closed (9 and 10 closed, 10 and 11 disconnected). The indicator light goes out, the buzzer stops alarming, and the relay is disconnected (9 and 10 are disconnected, 10 and 11 are closed).

[3] Smoke detection sensor, try to keep the smoke sensor close to the smoke as much as possible for more accurate detection

[4] The smoke concentration detection setting knob is rotated clockwise to provide a smoke concentration threshold; Rotate counterclockwise to lower the smoke concentration threshold.

[5] Power indicator light, permanently on after power supply

[6] Negative pole of power supply

[7] Positive pole of power supply

[8] The working power supply rotates, and the DC 5-7V pins are plugged in with a short-circuit cap, while the DC 7-30V pins are disconnected

[9] Normally open pin of relay

[10] Relay common pin

[11] Normally closed foot of relay

Package included:

1 x MQ-2 Smoke Sensor Module Smoking Detector Alarm Relay Switch Controller 12V 24V