NRF24L01+ PA LNA Wireless Module 2.4GHz Enhanced Power Transceiver Wireless Transceiver Module 1.9～3.6V for Arduino/Raspberry Pi
Default Title
$8.33
Sale price
$8.33
Regular price
$0.00
Skip to product information
NRF24L01+ PA LNA Wireless Module 2.4GHz Enhanced Power Transceiver Wireless Transceiver Module 1.9～3.6V for Arduino/Raspberry Pi
$8.33
Sale price
$8.33
Regular price
$0.00
Description
SPECIFICATIONS
Brand Name: NONE
Choice: yes
Condition: New
High-concerned chemical: none
Origin: Mainland China
Type: Module
Low Operating Voltage: 1.9–3.6V
High Data Rate: 2Mbps (configurable to 1Mbps or 2Mbps via software), significantly reducing wireless transmission collisions due to ultra-short air transmission time.
Multi-Channel: 125 frequency channels, supporting multi-point communication and frequency hopping.
Compact Size: Built-in 2.4GHz antenna, ultra-small dimensions: 15×29mm (including antenna).
Dimensions: 17.8mm × 12mm
Weight: 1.5g
The NRF24L01 is a single-chip transceiver operating in the globally available 2.4–2.5GHz ISM band. The wireless transceiver includes:
Frequency generator
Enhanced ShockBurst™ mode controller
Power amplifier
Crystal oscillator
Modulator
Demodulator
Output power, channel selection, and protocol settings are configurable via the SPI interface.
Ultra-low power consumption:
Transmit mode (6dBm): 9.0mA
Receive mode: 12.3mA
Even lower current in power-down and standby modes.
Key Features:
Low operating voltage: 1.9–3.6V
High-speed data rate: 2Mbps (configurable to 1Mbps or 2Mbps), minimizing wireless collisions.
125 frequency channels, enabling multi-point and frequency-hopping communication.
Ultra-compact design: Built-in 2.4GHz antenna, dimensions 15×29mm (including antenna).
Low power consumption: Fast air transmission and startup time in acknowledgment mode drastically reduce current draw.
Low application cost:
Integrated RF protocol handling (e.g., automatic retransmission of lost packets, auto-acknowledgment).
SPI interface compatible with MCU hardware SPI or GPIO bit-banging.
Internal FIFO supports high/low-speed microprocessors, enabling cost-effective MCU designs.
Easy development:
Fully integrated link layer simplifies development.
Automatic retransmission of lost packets (retry time/count configurable via software).
Auto-acknowledgment upon valid data reception (no additional programming required).
Carrier sensing (fixed-frequency detection).
Built-in hardware CRC and point-to-multipoint address control.
Packet error counter and carrier detect for frequency hopping.
Six configurable receive channels with selective activation.
Standard 2.54mm-pitch pin headers for embedded applications.
High Data Rate: 2Mbps (configurable to 1Mbps or 2Mbps via software), significantly reducing wireless transmission collisions due to ultra-short air transmission time.
Multi-Channel: 125 frequency channels, supporting multi-point communication and frequency hopping.
Compact Size: Built-in 2.4GHz antenna, ultra-small dimensions: 15×29mm (including antenna).
Dimensions: 17.8mm × 12mm
Weight: 1.5g
The NRF24L01 is a single-chip transceiver operating in the globally available 2.4–2.5GHz ISM band. The wireless transceiver includes:
Frequency generator
Enhanced ShockBurst™ mode controller
Power amplifier
Crystal oscillator
Modulator
Demodulator
Output power, channel selection, and protocol settings are configurable via the SPI interface.
Ultra-low power consumption:
Transmit mode (6dBm): 9.0mA
Receive mode: 12.3mA
Even lower current in power-down and standby modes.
Key Features:
Low operating voltage: 1.9–3.6V
High-speed data rate: 2Mbps (configurable to 1Mbps or 2Mbps), minimizing wireless collisions.
125 frequency channels, enabling multi-point and frequency-hopping communication.
Ultra-compact design: Built-in 2.4GHz antenna, dimensions 15×29mm (including antenna).
Low power consumption: Fast air transmission and startup time in acknowledgment mode drastically reduce current draw.
Low application cost:
Integrated RF protocol handling (e.g., automatic retransmission of lost packets, auto-acknowledgment).
SPI interface compatible with MCU hardware SPI or GPIO bit-banging.
Internal FIFO supports high/low-speed microprocessors, enabling cost-effective MCU designs.
Easy development:
Fully integrated link layer simplifies development.
Automatic retransmission of lost packets (retry time/count configurable via software).
Auto-acknowledgment upon valid data reception (no additional programming required).
Carrier sensing (fixed-frequency detection).
Built-in hardware CRC and point-to-multipoint address control.
Packet error counter and carrier detect for frequency hopping.
Six configurable receive channels with selective activation.
Standard 2.54mm-pitch pin headers for embedded applications.
Free Shipping Over $199
- Standard Shipping: Standard Shipping (12–18 Business Days)
- Express Shipping: Expedited Shipping (5–9 Business Days)
- Free Shipping: Orders over $199 qualify automatically
- Tracking: Full tracking number provided for all orders
30-Day Return Policy
- Returns: 30-day hassle-free return window
- Condition: Items must be unused and in original packaging
- Refund: Full refund processed within 3-5 business days
Why Choose Us?
- Factory Direct: ISO/TS 16949 certified manufacturer
- Quality: 100% electrical continuity tested before shipment
- Experience: 15+ years in automotive connector industry
- Support: Professional technical support available
You may also like
Blog posts
Title
An excerpt of your blog post's content
Title
Date|Author
Subscribe to our emails
Be the first to know about new collections and special offers.