SPECIFICATIONS

EN： Unlock Your Charger's Full Potential! Type-C PD/QC/AFC Full Protocol Trigger, One Button to Decoy 5V-20V Adjustable Voltage, the Ultimate Solution for Powering Laptops, Devices & Testing.

EN：

• Feature: Supports Full Protocol Decoy (PD2.0/3.0, QC2.0/3.0, AFC)

• Advantage: Compatible with most brand fast chargers and power banks, wide protocol coverage.

• Benefit: One module works with all mainstream fast charging, able to trigger higher voltage from Apple, Android, or laptop chargers you have.

• Feature: 5V/9V/12V/15V/20V Five-Gear Adjustable Output

• Advantage: Cycle through gears with a button, digital display shows current gear and status.

• Benefit: Precisely obtain the voltage your device needs to safely power laptops, MCUs, car devices, etc.

• Feature: Integrated Voltage/Current Detection (on some models)

• Advantage: Can display real-time output voltage and current from the charger, verifying its capability.

• Benefit: Acts as both a trigger and a simple tester, instantly checking if your charger and cable are up to standard.

• Feature: Plug-and-Play, Compact & Portable

• Advantage: No driver or external power needed, plug Type-C directly.

• Benefit: A portable voltage converter tool to solve power issues anytime, anywhere.

EN： Frustrated that your PD power bank can't charge your old laptop? Or want to turn a phone fast charger into an adjustable power supply? This full-protocol fast charge trigger is your key. It “negotiates” with your charger to decoy it into outputting voltages higher than the standard 5V, a must-have tool for geeks, repair engineers, and outdoor workers.

EN：

• ⚠️ Core Principle Warning: This is a protocol trigger, NOT a voltage converter. Its output voltage depends entirely on the protocols and profiles supported by the connected charger. If the charger doesn't support PD or the target voltage, the module won't work or will only output 5V.

• ⚠️ Charger & Cable Requirement: Must use a charger supporting PD/QC/AFC protocols and a full-featured Type-C to Type-C cable that supports data (not charging-only). Poor-quality or charge-only cables will cause triggering to fail.

• ⚠️ Load Device Safety Warning: BEFORE connecting your device (e.g., laptop), you MUST confirm the device's input voltage range and set the module to the exact voltage allowed by the device (e.g., 19V). Higher voltage will instantly destroy your device!

• ⚠️ Power & Thermal Limit: The max power throughput is limited by charger capability, cable quality, and its own design. When powering high-wattage devices (e.g., laptops), the charger, cable, and module may get hot. Do not cover and ensure ventilation.

• 🔧 Correct Usage Sequence: 1. Connect a PD-supported charger to the module. 2. Observe the display, press the button to switch to the target voltage. 3. Turn off the charger or disconnect the module. 4. Connect your load device. 5. Re-power the charger.

EN：

• Input: USB Type-C

• Protocols: PD2.0/3.0, QC2.0/3.0, AFC, FCP, etc.

• Output Voltage: 5V, 9V, 12V, 15V, 20V (or adjustable)

• Output: Type-C Female or Screw Terminals

• Display: Digital Tube (Voltage/Current/Status)

• Modes: Trigger Mode, Monitor Mode