SPECIFICATIONS

Wireless Power Supply Led Module Induction LED Light Power Supply Module Type-c 5V Suitable for Gundam Model Plus Light

Wireless Power Supply Led Module W 10PCS LED (2xred + 2xblue + 2X green + 2xwhite + 2x yellow)

If single color needs to be purchased separately, a group of 10

Product parameters

POWER : DC 5V OR Type-c

Single coil: 7cm coil, the emission distance is 0-10CM (different for each color lamp), the maximum can reach 12CM.

Double coil: the induction distance can reach 18CM

Note : Double coils cannot be overlapped. At least 1CM distance should be maintained

How to use: After the transmitting coil is energized, put the receiving lamp bead into the induction range of the

transmitting coil to light up, and the lamp bead is lit by electromagnetic induction, without batteries and magnets.

Note : The smaller the lamp bead, the shorter the sensing distance. The sensing distance in the baby description and

picture refers to the sensing distance of the large lamp beads.

Note: When the 7cm coil and the standard coil are in use, the lamp bead and the transmitting coil should always be

horizontal, and if the tilt angle is too large, the brightness of the lamp bead will be weakened until it does not emit

light . (The high-power version is not limited by the angle)

Note : ️Metal may burn the transmitter coil, and there must be no large metal objects within the induction range of the

transmitter coil!

Note: How many ways are there to light up the lamp beads?

1: Mobile phone wireless charger. 2: Coils sold at this link.

The lamp beads will flicker when placed on the wireless charger of the mobile phone. If you want to keep the light on, you

can place the lamp beads between the mobile phone and the wireless charger.