USB Type C 2 Pin Waterproof Female Socket to JST PH 2.0mm 2 Pin Plugs Wire Cable Connector USB-C DIY Charging Port With Nut

USB Type C 2 Pin Waterproof Female Socket to JST PH 2.0mm 2 Pin Plugs Wire Cable Connector USB-C DIY Charging Port With Nut

$11.56

$11.56 $0.00

Color Black White

Package Quantity 2Pcs 5Pcs 10Pcs 1Pcs

Description

SPECIFICATIONS

Brand Name: LOCHEUK

Choice: yes

Color: Red, Black, White, Silver

Connector A: USB Type C Female Jack Socket

Connector B: JST PH 2.0mm 2 Pin

Does it include a Battery?: No

Does it include wireless functionality?: No

EU LVD Voltage: Low voltage: Below 50Vac or 75Vdc

Feature1: Type-C Female 2 Pin Type-C Socket Connector

Feature2: 2Pin USB-C Connector Type-C Waterproof

Feature3: Charging Port USB-C Charger Plug

Gender: Female

High-concerned chemical: none

Length: Appr 15CM

Material: Metal, Plastic

Model Number: USB-C Female to PH 2.0 2 Pin Connector

Origin: Mainland China

Package: Choose

Voltage: 24V

Voltage / Current: 24V / 2A

semi_Choice: yes

USB Type C 2 Pin Waterproof Female Socket to JST PH 2.0mm 2 Pin Plugs Wire Cable Connector USB-C DIY Charging Port With Nut

USB Type-C Female to PH 2.0mm 2 Pin Wire Connector
Color: Red, Black, White
Material: Metal, Plastic
Connector A: USB Type-C Female
Connector B: PH 2.0mm 2 Pin Plug
Length: Appr 15CM / 5.90Inch
Voltage/Current: 24V / 2A
Red Wire Positive Pole, Black Wire Negative Pole
Package: Choose

Note:
1. Please confirm whether it is the product you need before payment.
2. Please allow ±0-1cm difference due to manual measurement.(1 inch=2.54cm)
3. The picture may not reflect the actual color of the product, subject to the actual product.
Please make sure you do not mind before you bid. Thank you!

Special Note: The red/black wire sequence of the JST PH2.0mm 2-Pin housing does not guarantee compatibility with all devices. If you need to reverse the red/black wire sequence of the housing, please refer to the disassembly method in the following picture.

Disassembly Steps:
1. Insert tweezers or a thin needle from the rear of the terminal (the side where the cable enters) and gently lift the plastic latch.
2. Gently pull out the terminal: Lightly pull the cable and tweezers or thin needle, and the terminal will come out.
3. Swap the wire sequence: After swapping the red and black wires, reinsert them into the terminal slots, ensuring the latch clicks into place.
4. When reinserting the terminal into the slot, ensure that the lifted part of the housing (the plastic latch) has been restored. If it is damaged, please replace it with a new housing.