SPECIFICATIONS

Specifications:

Product Name: Motion-Activated COB LED Strip Light

Power Options:Battery Version: 4×AA (1.5V each, not included)，USB Version: DC5V/3A (adapter not included)

LED Type: COB (Chip-on-Board)

LED Density: 120 LEDs/meter

Length Options: 0.5m, 1m, 2m, 3m, 4m, 5m

Motion Sensor:Detection Range: 3-5 meters

Detection Angle: 120°

Delay Time: Adjustable (15s to 5min)

Waterproof Ratings:Strip- IP68 (submersible up to 1m for 30 mins)，Battery Box-IP20 (indoor use only)

Adhesive: 3M VHB red tape (pre-installed)

Operating Temperature: -20°C to +50°C (-4°F to +122°F)

Storage Temperature: -30°C to +60°C (-22°F to +140°F)

Certifications: CE, RoHS

Features:

Smart Motion Activation:Automatically turns on when motion is detected (3-5m range) and off after adjustable delay (15s–5min).

Dual Power Options: AA Battery Version: Portable for wireless use (4×AA batteries required).

USB Version: Continuous power via 5V/3A adapter (not included).

IP68 Waterproof Strip:Fully submersible; ideal for bathrooms, pools, or outdoor landscapes.

COB Technology:Seamless, glare-free lighting with 120 LEDs/meter (no visible dots).

Easy Installation:Peel-and-stick adhesive for quick mounting on curved/flat surfaces.

Energy-Efficient:Low power consumption (battery life: ~20 hours with alkaline AAs).

Installation Guide:

For Battery Version:

Insert Batteries:Open the IP20 battery box, insert 4×AA batteries (observe +/- polarity).

Mount the Strip:Clean the surface, peel the red adhesive backing, and press firmly.

Position Sensor:Angle the motion sensor toward the detection area (avoid obstructions).

For USB Version:

Connect Power:Plug the strip into a 5V/3A USB adapter (not included).

Mount the Strip:Same as battery version (use included adhesive).

Usage Instructions:Motion Sensitivity Adjustment:

Rotate the sensor’s potentiometer to set detection range (test with hand movements).

Delay Time Setting:

Adjust the second potentiometer to control how long lights stay on (15s–5min).

Waterproof Care (IP68):
For underwater use, seal cut ends with silicone (not included).

Package Includes:

1 × COB LED Strip

1 × Battery Box (IP20) or USB Power Cable

Excluded Items:

AA batteries (for battery version)

5V/3A USB adapter (for USB version)