1-10PCS 2S 3.2V 3.7V 10A LiFePO4 Battery Protection Board, 6.4V 7.3V BMS with Balancing for 32650 18650 3.2V Battery Pack DIY

1-10PCS 2S 3.2V 3.7V 10A LiFePO4 Battery Protection Board, 6.4V 7.3V BMS with Balancing for 32650 18650 3.2V Battery Pack DIY

$108.63

$108.63 $0.00

Color 3.2V LiFePO4 10PCS 3.7V Lithium 10PCS 3.2V LiFePO4 5PCS 3.7V Lithium 5PCS 3.2V LiFePO4 3.7V Lithium

Description

SPECIFICATIONS

Application: Computer

Brand Name: NONE

Choice: yes

Condition: New

Dissipation Power: n/a

High-concerned chemical: none

Operating Temperature: n/a

Origin: Mainland China

Supply Voltage: n/a

Type: Module

is_customized: Yes

Lithium battery and lithium iron phosphate wiring is consistent

P+P- Input and output same port

Model: HX-2S-JH20

Dimensions: 46.7*23*3.15MN

Upper limit working current: 10A

Upper limit instantaneous current: 20A

Overcharge voltage range: 4.25V ± 0.05V

Over-discharge voltage range: 2.9V ± 0.05V

Static current: less than 10uA

Charging voltage: 8.4V-9V

Short-circuit protection: Protected, with self-recovery after delay.

Model: HX-2S-JH20

Dimensions: 46.7*23*3.15MN

Upper limit working current: 10A

Upper limit instantaneous current: 20A

Overcharge voltage range: 3.65V ± 0.05V

Over-discharge voltage range: 2.0V-2.5± 0.05V

Static current: less than 10uA

Charging voltage: 7.2V-8.4V

Short-circuit protection: Protected, with self-recovery after delay.

Note:

Lithium battery protection boards cannot be used for lithium iron phosphate batteries, hernia lamps, battery packs for hand drills, battery packs for electric fish ponds, battery packs for electric bicycles, batteries for children's strollers, power motors of 550 or above, and 1W fisheye LED lights. Customers purchasing these combinations are kindly reminded to take note!

The described power range is applicable to the following products:

Massager battery packs, LED light backup power supplies, 12V electronic products, solar street lamp battery packs, monitoring backup power supplies, and other products.

Main functions:

Overcharge protection, overdischarge protection, short circuit protection, overcurrent protection

Wiring instructions:

B+ is connected to the positive terminal of the battery

B- Connect to the negative terminal of the battery

MB is connected to the connection point between battery 1 and Battery 2

P+ is connected to the positive terminal for charging/discharging (the charging terminal and the discharging terminal are shared)

P- Connect to the negative terminal of the charging/discharging terminal (the charging/discharging terminal is shared)

Warm reminder: When assembling the battery pack, the battery voltage, capacity and internal resistance should all be matched properly. The battery voltage should be around the rated voltage of 3.7V. If there is no output after assembling the battery pack, it can be charged at 8.4V

Free Shipping Over $199