SPECIFICATIONS

Product description
1.the module uses genuine high quality 30A relay,normally open interface maximum load:AC 250V /30A,DC 30V / 30A
2.the use of SMD optocoupler isolation,strong drive capability,stable performance ; trigger current 5MA
3.the module voltage 5V,12V,24V to choose from;
4.the module can be set by jumper high or low trigger;
5.user-friendly interface design,all interfaces can be directly connected through the terminal leads,very convenient
6.Module Size:72mm*72mm ( L*W)
7.with four fixed bolt holes,holes 3.1mm

Product Parameter
Quiescent current : 5mA
Maximum current : 190mA
Trigger current : 2-4mA

Relay version:12V
Quiescent current:5mA
Maximum current:80mA
Trigger current : 2-4mA

Relay version:24V
Quiescent current : 5mA
Maximum current : 50mA
Trigger current : 2-4mA

1.DC + :module DC power supply positive( trigger terminal voltage positive)
2.DC- : module DC power supply negative( trigger terminal voltage negative)
3.IN : signal trigger terminal ( the default trigger voltage and power supply the same )
4.High / low level trigger mode selection,as shown,jumper and L-side connection,IN-side low-level trigger,connected with the H-side high trigger
5.NC(NC):normally closed relay
6.Common (COM):Relay Common
7.often open (NO):relay normally open

Trigger voltage
05V low level trigger module:
0-2VDC relay connected (ON)
3-The 5VDC relay is off (OFF)

12V low level trigger module:
0-5VDC relay is turned on (ON),
6-12VDC relay is off (OFF)

24V low level trigger module:
0-12VDC relay connected (ON)
13-24VDC relay is off (OFF).

05V high level trigger module:
3.3-5VDC relay connected (ON)
The 0-2.5VDC relay is off (OFF).

12V high level trigger module:
6-12VDC relay on (ON)
0-5.5VDC relay is off (OFF)

24V high level trigger module:
12-24VDC relay connected (ON)
0-8.5VDC relay is off (OFF).