SPECIFICATIONS

Description                  

Product Description：
Note1:
Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.
Note2:
【No sensor programming Required】 : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by Right scan tool or "re-learning" Right Activation tool is important , if you wanna Your vehicel Relearn Procedure Description , Pls email us ...
1.Stationary Relearn: Requires the vehicle be placed in the "Learn Mode".
2.Automatic Relearn: For some vehicles, can be completed by driving.
3.OBD Relearn: Directly writes TPMS sensor IDs to the TPMS module via the OBD connector.
Installation of TPMS is recommended to be performed only by trained professionals.

Specification:
Condition: Brand New&High Quality
Manufacture Part Number:F2GT-1A180-AB
Replacement Part Number: F2GT-1A180-AB,EV6T-1A180-CB/CC/CD,F2GZ-1A189B
Operating Frequency: 315MHz
Fitment Type: Direct Replacement
Color: As the pictures show
Easy to install
Package You Will Receive: 1/4PCS Tire Pressure Sensor

Vehicle Fitment (please check your sensor number and frequency before purchase):
For Ford Fusion(from 2017-01 to 2018-12)
For Ford Ecosport(from 2018-01 to 2028-03)
For Ford Edge(from 2015-03 to 2022-06)
For Ford Explorer(from 2016-01 to 2019-09)
For Ford F-150 Reg/Ext(from 2014-11 to 2017-12)
For Ford F-150 SuperCrew(from 2014-11 to 2019-12)
For Ford Fusion(from 2017-01 to 2018-12)
For Ford Fusion(from 2019-01 to 2021-05)
For Ford Mustang(from 2014-10 to 2022-10)
For Ford Transit Connect(from 2018-05 to 2021-12)
For Lincoln Continental(from 2016-08 to 2022-09)
For Lincoln MKC(from 2018-01 to 2019-12)
For Lincoln MKX(from 2015-06 to 2019-07)
For Lincoln MKZ(from 2018-01 to 2020-12)
For Lincoln Nautilus(from 2018-10 to 2019-12)
For Lincoln Nautilus(from 2020-01 to 2020-12)
Please make sure your existing part number matches one of the numbers listed above.If the number(s) do not match,then the part will not work with your vehicle.

■ Installation Process for reference only :
1. Loose the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.