SPECIFICATIONS

Features: 1.Adopting bidirectional optocoupler isolation, with strong driving ability and stable performance. 2.The module can be triggered at high or low levels through jumper settings. 3.Equipped with 4 fixing bolt holes. 4.With power indicator light (red). 5.The interface design is user-friendly, and all interfaces can be directly connected and led out through wiring terminals. Parameters: 5V 1 channel Working voltage: 5V Maximum load: AC 250V/10A, DC 30V/10A 9V 1 channel Parameters: Maximum load: AC 250V/10A, DC 30V/10A Trigger current: 5mA Working voltage: 9V  Module size: 50 × twenty-six × 18.5 mm (length x width x height) Four fixing bolt holes with a diameter of 3.1 millimeters 12V 1 channel Trigger current: 5mA Module working voltage: DC12V Load current: 2A Module size: 50 * 26 mm * 18.5 mm (L * W * H) There are four fixed bolt holes, with a spacing of 3.1mm and 44.5mm * 20.5mm 24V 1 channel Drive current: 5mA Power supply voltage:+24VDC Equipped with 4 positioning holes with a diameter of 3.1mm for easy bolt fixation Module Interface DC+: Connected to the positive pole of the power supply (voltage according to relay requirements) DC -: Connected to the negative pole of the power supply IN: The relay can be controlled to engage at high or low levelsRelay output terminal: NO: Normally open interface of the relay, suspended before the relay is pulled in, and short circuited to COM after pulling in COM: Relay Common Interface NC: Normally closed interface of the relay, short circuited to COM before relay engagement, suspended after engagement High and low level trigger selection terminal 1. When the jumper is shorted to LOW, it is triggered at a low level; When the jumper is short circuited to high, it is triggered at a high level.

Package include: Relay module * 1（5V 9V 12V 24V optional）