10pcs TB6612 DRV8833 Dual Motor Driver 1A TB6612FNG for Arduino Microcontroller Better than L298N

10pcs TB6612 DRV8833 Dual Motor Driver 1A TB6612FNG for Arduino Microcontroller Better than L298N

$26.01

$26.01 $0.00

Description

SPECIFICATIONS

Application: Computer

Brand Name: NONE

Choice: yes

Condition: New

Dissipation Power: n/a

High-concerned chemical: none

Operating Temperature: n/a

Origin: Mainland China

Supply Voltage: n/a

Type: Voltage Regulator

semi_Choice: yes

10pcs TB6612 DRV8833 Dual Motor Driver 1A TB6612FNG for Arduino Microcontroller Better than L298N

Description:
1. Size:18.5*16mm
2. Input voltage:3V-10V
3. Single H-Bridge output current:1.5A(It can drive two DC motor)
4. Overcurrent protection:YES
5. Short circuit protection:YES
6. Undervoltage lockout:YES
7. Overheating protection:YES
8. With a low-power sleep mode

Feature:
1. ULT PIN:mode set.Low level is sleep mode
2. OUT1,OUT2:1-channel H-bridge controlled by IN1/IN2
3. OUT3,OUT4:2-channel H-bridge controlled by IN3/IN4
4. EEP PIN:Output protection.Default no need to connect.
5. VCC:3-10V
6. GND

Application:
1. DC motor which drive current is less then 1.5A
2. 4-wire step motor

DRV8833 RED

Introduction of Features:

Size: 18* 21mm

Input voltage: 2.7V-10.8V

Single H bridge output current: 1.5A, can drive 2 DC reduction motor.

Built-in overcurrent protection, short circuit protection, undervoltage locking and overheat protection. With low power sleep mode.

Purpose: Can drive 1.5A DC motor and 4 wire stepper motor.

Features:

· Power supply voltage: VM=15V max, VCC=2.7-5.5V

· Output current: Iout=1.2A(average) / 3.2A (peak)

· Standby control to save power

· CW/CCW/short brake/stop motor control modes

· Built-in thermal shutdown circuit and low voltage detecting circuit

· All pins of the TB6612FNG broken out to 0.1" spaced pins

· Filtering capacitors on both supply lines

Pin description:

ANI1: AO1 logic input control port, level 0-5V.

AIN2: AO2 logic input control port, level 0-5V.

BNI1: Logical input control port of BO1, level 0-5V.

BIN2: logical input control port of BO2, level 0-5V.

AO1 and AO2 are 1-way H-bridge output ports connected to two feet of a DC motor.

BO1 and BO2 are two H-bridge output ports connected to the two feet of another external direct motor.

GND: ground.

VM: Chip and motor supply pin, voltage range 2.7V -- 10.8V.

STBY: grounded or suspended chip does not work, no output, 5V work; Level 0 to 5 v.

he TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and s. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU.

Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

Features: