110V-220V 12V 24V T3231 Multi-function Digital Time Delay Relay LED Cycle Timer Control Switch Adjustable Timing Delay Relay

110V-220V 12V 24V T3231 Multi-function Digital Time Delay Relay LED Cycle Timer Control Switch Adjustable Timing Delay Relay

$23.49

$23.49 $0.00

Size AC 110-220V 1500W DC 24V 480W DC 12V 240W

Current Range O-Active output N-Passive output

Description

SPECIFICATIONS

Beep alarm: None

Brand Name: GlintDeer

Certification: CE,RoHS

Contact Load: High Power

Delayed shutdown: supported

Delayed startup: supported

EU LVD Voltage: Low voltage: Below 50Vac or 75Vdc

External trigger: Reserve an external trigger port and install a trigger device on your own

High-concerned chemical: none

Infinite Loop: Supports

Limited cycle: 1~999 adjustable cycles

Loop switch: Supports

Model Number: T3231 Multi-function Digital Time Delay Relay LED Cycle Timer Control

Origin: Mainland China

Power Source: Ac

Power off saving: supported, only saves settings, power on reset and restart

Protect Feature: Sealed

Theory: Time Relay

Timing range: 0~999, minimum measurement unit 1 second

Timing unit: seconds/minutes/hours

Trigger method: automatic trigger (default)/manual trigger

Use: General Purpose

Voltage: 220V

is_customized: Yes

O/N：Type of output

O=Active output, charged output, output voltage=operating voltage
N=Passive output, no output, equivalent to a single pole switch

Wiring method：

Relay type: 1-channel normally open relay

Timing unit: seconds/minutes/hours

Timing range: 0~999, minimum measurement unit 1 second

Loop switch: Supports

Delayed startup: supported

Delayed shutdown: supported

Infinite Loop: Supports

Power off saving: supported, only saves settings, power on reset and restart

Beep alarm: None

Limited cycle: 1~999 adjustable cycles

Trigger method: automatic trigger (default)/manual trigger

External trigger: Reserve an external trigger port and install a trigger device on your own

Product size: 79.5 × 42.1 × 27.8mm

Installation opening: 77 × 39.3mm

Code interface display:

Power on time to be set status

Power outage time to be set status

During program operation, the output is powered on and the OUT indicator light is on

During program operation, the output is powered off and the OUT indicator light is off

Setting method:

Enter the "Code Menu" and press and hold the "S" button for 6 seconds to enter

Click the "▲" or "▼" buttons to adjust the single code parameters

Click on the 'S' key to switch codes

Double click the "S" button to enter the time setting

Set power-on time

Switch to power off time setting

Set power outage time

Manual trigger: P4=OFF, that is, in manual trigger mode, click the "R" button to trigger operation

Cyclic logic:

7.1. Cyclic alternating on/off (controlled by P2 on/off priority): On ≠ 0 Off ≠ 0

7.1. Delayed startup, maintain power on after startup (not controlled by P2 priority): On=0 Off ≠ 0

7.1 Delayed shutdown, maintaining power off after shutdown (not controlled by P2 priority): On ≠ 0 Off=0

Reserved external triggering function, requiring self welding of the connection end and external triggering device

DC12V /24V Reserve external trigger interface:

Connection method ①: Self prepared XH-2.45-2P terminal welding, convenient for external trigger connection

Connection method ②: Weld the external triggering wire directly to the reserved interface

AC110-220V version reserves external triggering interface：

Connection method ①: Self prepared XH-2.45-2P terminal welding, convenient for external trigger connection

Connection method ②: Weld the external triggering wire directly to the reserved interface