SPECIFICATIONS

Brand Name: diymore

Choice: yes

Condition: New

High-concerned chemical: none

Load current 2A: Module size: 50 * 26 millimeters * 18.5 millimeters (L * W * H)

Origin: Mainland China

Trigger current 5mA: Module working voltage: DC12V

Type: Relay

Product Features

1. Adopting bidirectional optocoupler isolation, with strong driving capability and stable performance.

2. The module can be triggered by setting high or low levels through jumper wires.

3. There are 4 fixed bolt holes.

4. Equipped with a power indicator light (red).

5. The interface design is user-friendly, and all interfaces can be directly wired out through terminal blocks.

Product parameters

Trigger current: 5mA

Module working voltage: DC12V

Load current: 2A

Module size: 50 * 26 millimeters * 18.5 millimeters (L * W * H)

There are four fixed bolt holes, with a diameter of 3.1 millimeters and a spacing of 44.5 millimeters by 20.5 millimeters

Module interface

DC+： Connect the positive pole of the power supply (voltage according to relay requirements)

DC-： Connect the negative pole of the power supply

IN： Can control the relay to close at high or low levels

Relay output terminal:

NO： Relay normally open interface, suspended before closing, short circuited to COM after closing

COM： Relay common interface

NC： Relay normally closed interface, short circuited to COM before relay closing, suspended after closing

High and low level trigger selection terminal

When the jumper is short circuited to LOW, it triggers a low level;

When the jumper is short circuited to high, it triggers a high level.

Delivery List

Relay module * 1