SPECIFICATIONS

16A Self-locking Relay Board Self-holding Magnetic Bistable Power-off Memory Control Relay with Reverse Power Connect Protection

Specifications:

Voltage: DC wide voltage range: 10V-28V. Note that the higher the voltage, the faster the switching speed.

Operating Current: 50mA based on 12V

Standby Current: 6.5mA

Output Mode: a set of relays normally open + normally closed, passive output (i.e., the contacts and the power supply of this module are isolated)

Output Capacity: 16A 250VAC

Dimensions: 69*28*20mm, screw hole center 64*23mm, hole diameter 2.8mm

Operating Temperature: -30 to +75°C

Operating Humidity: 0-90%RH, no condensation

Reverse Connection Protection: this module is equipped with a reverse power connection protection function. When the positive and negative connections of the power supply are incorrect, the module will not operate.

Voltage Tolerance: it is allowed to operate within the range of 10V to 28V.

Action Time: the switching action takes approximately 0.1 seconds, meaning a maximum of 5 switches per second.

Frequency: 2 times per second @24V. Note that it is related to factors such as the power-on speed and voltage of the power supply.

Power-off hold: means that the output remains in its final state when power is off.

Function: switch the output state each time it is powered on. For instance, when power is on, the relay is connected; when power is cut off again, the relay is disconnected. Even if there is no power output in the connected state, the output remains connected.

Note:

1. Due to the light and screen difference, the item's color may be slightly different from the pictures.

2. Please allow 1mm-1cm differences due to manual measurement.

Package Included:

1x Relay Module