SPECIFICATIONS

Brand Name: NONE

Choice: yes

Condition: New

High-concerned chemical: none

Origin: Mainland China

Type: Module

feature 1: 600W

feature 2: DC 4V-60V

feature 3: MOS Tube FET Trigger Drive Module

feature 4: High-Power

1pc High-Power 600W MOS Tube FET Trigger Drive Module DC 4V-60V PWM Control High / Low Level Trigger Switch

Module highlights:

1.This module supports high level trigger, low level trigger, switching control, PWM control;

2. Adopting original imported dual MOS parallel active output, lower internal resistance, higher current, strong power, 10A at room temperature, 600W, which meets the use of most devices;

3. Support ultra-wide voltage: DC 4V~60V;

4. Easily realize the control of high-power devices.

Attention:

1. At the same moment, there can only be one kind of signal to control this module, you can't use 2 and more kinds of signals to control this module at the same time;

2. high level trigger voltage range: DC3.0V ~ 24V, that is, the signal in the 3.0V ~ 24V when the MOS tube conduction, below 0.6V, that is, 0V ~ 0.6V, MOS tube off, the signal voltage can not be in the 0.6V ~ 3.0V between, that MOS in the incomplete open state, the use of high-power burn MOS. 3. low level trigger voltage range: DC3.0V ~ 24V, that is, the MOS tube in the incomplete open state, high-power use of MOS;

3. low-level trigger voltage range: DC 0V ~ 0.6V, that is, the signal voltage in the 0V ~ 0.6V MOS tube conduction, higher than 3.0V, MOS tube off, the signal voltage can not be in the 0.6V ~ 3.0V, that MOS is not fully open state, high-power use burned MOS.

Product parameters and applications:

1: Operating voltage: DC 4V - 60V;

2: Trigger signal source: high level trigger (DC3.0V - 24V), low level trigger (DC 0.0V ~ 0.6V), switching control, can be connected to the microcontroller IO port, PLC interface, DC power supply, etc., can be connected to the PWM signal, the signal frequency 0 - 2.5KHZ support.

3: output capacity: DC DC 4V - 60V, continuous current 10A at room temperature, power 600W! Auxiliary cooling conditions, the current can reach 15A.

4: Application: The output can control high-power devices, motors, light bulbs, LED light strips, DC motors, miniature water pumps, solenoid valves, etc. You can input PWM to control the motor speed, the brightness of the lights and so on.

5: service life: unlimited switching; operating temperature: -40-85 ℃; size: 4.6 * 2.9 * 1.5cm