SPECIFICATIONS

Application: Module

Brand Name: FSXSEMI

Choice: yes

Condition: New

Dissipation Power: Module

Model Number: 1 Channel Relay Module

Operating Temperature: Module

Origin: Mainland China

Package: Module

Supply Voltage: 5V 9V 12V 24V

Type: Module

is_customized: Yes

semi_Choice: yes

A module description:
1. The module uses genuine high-quality relays, the maximum load of the normally open interface: AC 250V/10A, DC 30V/10A;
2. Adopt SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA;
3. The working voltage of the module is 5V, 9V 12V 24V
4. The module can be triggered by a jumper to set high or low level;
5. Fault-tolerant design, even if the control line is broken, the relay will not act;
6. Power indicator (green), relay status indicator (red)
7. The interface design is user-friendly, all interfaces can be directly connected through the terminal block, which is very convenient
8. Module size: 50mm * 26mm* 18.5mm (length * width * height)
9. There are 4 fixing bolt holes, the hole is 3.1mm, and the spacing is 44.5mm*20.5mm
Two module interface:
1. DC+: connect to the positive pole of the power supply (the voltage is according to the requirements of the relay, there are 5V.9V.12V and 24V options)
2. DC-: Connect to the negative pole of the power supply
3. IN: It can control the relay to close at high or low level
Relay output:
1. NO: The relay is normally open interface, the relay is suspended before it is closed, and it is short-connected to COM after it is closed.
2. COM: relay common interface
3. NC: Normally closed interface of the relay, the relay is short-connected with COM before it is closed, and it is suspended after it is closed

High and low level trigger selection terminal:

1. When the jumper is shorted to LOW, it is low level trigger;

2. When the jumper is shorted with high, it is high level trigger.