SPECIFICATIONS

Brand Name: YTDMEN

Choice: yes

Condition: New

High-concerned chemical: none

Origin: Mainland China

Type: Module

Green
Product Description:
This is the XL7015 upgrade model, added enable control, enable pin, low-level operation, high-level shutdown, low-level operation when suspended, do not use the function of the pin does not have to connect!
XL7015 DC-DC step-down module is a high-efficiency, high-voltage step-down DC-DC converter, which can provide a high 0.8A output current capability, low ripple, excellent linear adjustment rate and load adjustment rate, the input voltage can be as large as 80V, far more than 2596 and other modules. The chip has a variety of built-in protection mechanisms. It can be applied to electric vehicle controllers and so on.

Product Description:
1.5V to 80V wide input voltage range.
2. Output voltage adjustable from 5V to 20V.
3. Small voltage drop of 1V.
4. Large switching current 0.8A.
5. Recommended output power less than 7W.
6. Built-in thermal shutdown protection, output short circuit protection, over-current protection.
7. Excellent linearity and load regulation.
8. Board size: 26.5mm * 23.5mm.

Blue
Product Description:
XL7015 DC-DC step-down module is a high efficiency, high voltage step-down DC-DC converter, which can provide high output current capability of 0.8A, low ripple, excellent linearity and load regulation, and the input voltage can be up to 80V, which is far more than that of 2596 and other modules. The chip has a variety of built-in protection mechanisms. It can be applied to electric vehicle controller, etc.

1. 5V to 80V wide input voltage range. 2;

2. Adjustable output voltage from 5V to 20V. 3;

3. Small voltage drop of 1V. 4;

4. Large switching current 0.8A. 5;

5. Recommended output power is less than 7W. 6;

6. Built-in thermal shutdown protection, output short-circuit protection, over-current protection;

7. excellent linearity and load regulation;

Hardware introduction and description:
Board size: 16mm * 44mm;

Wiring description:
1. VIN: Voltage input (5V-80V);

2. GND: input voltage ground terminal;

3. VOUT: output voltage terminal (5V-20V);

4. GND: output voltage ground;

Precautions:
1. Due to transportation constraints, the module itself does not come with a battery.