SPECIFICATIONS

Brand Name: NONE

Choice: yes

High-concerned chemical: none

Origin: Mainland China

Rated Voltage: 220V

Description :
Material :Steel Plastic
Working temp.: 200 °C
Rated Power: 300W
Rated voltage: 220V 50-60Hz
Plug Type: EU Plug(220v)
Color:Pink ,Blue,Black,White,Red,Green,Purple

Features:
1.Can be used to heating relief powder and shrinkable sheet.
2.Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
3.After completion, use the heat gun at high temperature to blow a few minutes.
4. it not only can add its hardness, but also its brightness.
5.The temprature can not adjustable, in theory, it can reach at 200 degree within a few seconds.
6.Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck.
7.Be carefull when using.

Package:
1 X Heat gun

Note:
Never touch the hot nozzle or melted glue for your sake.
Keep it stay away from children.

Instructions for use

Maintain a distance of 3-5CM from the artwork and heat it at a 45 degree angle until the artwork is completed

Incorrect usage method

Do not use a hot air gun to blow directly at objects at a 90 ° angle

Correct usage method

1. Plug in the power/turn on the switch

2. Keep a distance of 3-5cm from the artwork and heat it at approximately 45 degrees until the artwork is completed

3. Turn off the power and wait for it to cool down

4. Pay attention to cooling the product, as incorrect operation can cause the product to deform at high temperatures. Long term idle operation of the product without use can cause deformation of the product casing.