SPECIFICATIONS

Specifications

Power supply: 90-265VAC 50Hz/60Hz
Standby power: <0.36W
Maximum load: 1200W Max. (220-240VAC)
600W Max. (100-130VAC)
Microwave frequency: 5.8GHZ±75MHZ
Microwave power: <2mW
Surge current: 50A/500μS
Detection angle: 110° _ 120°
Working temperature: -20 _ +80°C
Working humidity: ≤93%RH

ATTENTION:

When starting to use the sensor product for the first time, you
need to pay attention to the following items:
1. The first power need to wait 12 seconds, stay away from
the place where the sensor can detect.After the light has
been automatically turned off, the human body enters the
detection range of the sensor and moves in the normal
direction of movement. The sensor can detect and control
the load to start working.
2. For the adjustment methods of LUX, delay time and
sensitivity, please refer to the contents in the diagrams of
A, B, and C for operation.

When using this product, please adjust the sensitivity to
the appropriate position you need. Do not adjust the
sensitivity to the maximum, so as not to cause the product
to not work normally due to wrong actions. Movement
caused by small animals and interference from the power
grid may cause the product to malfunction. When the
product cannot work normally, please try to reduce the
sensitivity appropriately, and then test.