SPECIFICATIONS

XL6009 is a high-performance 4A switch current boost (BOOST) module. The module uses the second-generation high-frequency switching technology XL6009E1 as the core chip, far more than the first generation of technology performance LM2577. The XL6009 boost module features lower Cost and superior performance, and the LM2577 module is about to be eliminated.

● wide input voltage 3V ~ 32V, the best operating voltage range is 5 ~ 32V;

● Wide output voltage 5V ~ 35V;

● Built-in 4A high efficiency MOSFET switch, the efficiency of up to 94%; (LM2577 current of only 3A)

● high switching frequency of 400KHz, you can use a small capacity of the filter capacitor that can buy very good results, smaller ripple, smaller. (LM2577 frequency is only 50KHz)

Technical Parameters:

IN + Input Positive IN- Input Negative!

OUT + Output Positive OUT- Output Negative

Test Comparison Example Reference:

Input 5V output 12V 0.8A 9.6W

Input 7.4V output 12V 1.5A 18W

Input 12V output 15V 2A 30W

Input 12V output 16V 2A 32W

Input 12V output 18V 1.6A 28.8W

Input 12V output 19V 1.5A 28.5W

Input 12V Output 24V 1 A 24W

Input 3V output 12V 0.4A 4.8W

Vin * Iin * Efficiency = Vout * Iout

Vin: Input voltage
Iin: Input current
Vout: Output voltage
Iout: Output current

XL6019 module Blue

Module Description:

The voltage is pulled down to below 7V or less when the car starts, and as high as 15V or more at high engine speeds. It is difficult for electrical appliances working on 12V to work normally. This automatic buck-boost module solves this problem. No matter the input voltage is 5V, 12V or 32V, the output can be stabilized at 12V.

1. Ultra-wide input voltage range: 5V~32V;

2. Ultra-wide output voltage range: 1.25V~35V (with automatic buck-boost, within the working range, any voltage input can be regulated for any voltage output);

3. Built-in 4A high-efficiency MOSFET switch, making the efficiency up to 94%; (LM2577 current is only 3A)

4. The ultra-high switching frequency is 400KHz, the ripple is smaller, and the volume is smaller. (LM2577 frequency is only 50KHz)

5. The module adopts SEPIC topology circuit, which is a mature buck-boost scheme.

6. The main chip adopts XL6009, with ultra-high switching frequency of 400KHz, smaller ripple and smaller volume. (LM2577 frequency is only 50KHz)

technical parameter:

Model Specifications

DSN6000AUD automatic buck-boost module

Modular nature

Non-isolated boost (BOOST)

Rectification method

Asynchronous rectification

input range

3.8V~32V

output range

1.25V~35V

Input Current

3A (maximum), no-load 18mA (5V input, 8V output, no-load less than 18mA. The higher the voltage, the greater the no-load current.)

Conversion efficiency

<94% (the greater the pressure difference, the lower the efficiency)

On-off level

400KHz

output ripple

50mV (the higher the voltage, the bigger the current, the bigger the ripple)

Load Regulation

±0.5%

Voltage regulation

±0.5%

Operating temperature

-40℃~ +85℃

Dimensions

48mm * 25mm * 14mm (L*W*H)

Instructions for use:

1. Connect to the power supply (5-32V), the power indicator light is on, and the module is working normally.

2. Adjust the blue potentiometer knob (usually turn clockwise to boost, counterclockwise

Step down) and monitor the output voltage with a multimeter until the required voltage is reached.

3. Some customers report that the output voltage of the module cannot be adjusted and is always equal to the input voltage. When you encounter this kind of problem, please turn the potentiometer counterclockwise for more than 10 turns, and then use the module to adjust the voltage normally.

Precautions:

1. It is recommended to use the current within 2.7A when working for a long time. In order to ensure the stability of the output, please keep the minimum voltage difference of 1.5V.
2. The wiring is connected as shown in the connection diagram shown in the highlights. Please do not connect it in reverse. The wrong connection method may cause the power module to burn out.

Applications:

1. Vehicle regulated power supply, you only need to connect the input end of this module to the car cigarette lighter to supply power, you can adjust the potentiometer, and the output voltage can be adjusted arbitrarily between 1.25-30V to charge your mobile phone, MP3, MP4, PSP, etc. Powered by many devices, very simple and convenient.

2. Power supply for electronic equipment. When the equipment needs 3-35V power supply and the corresponding voltage power supply is in hand, this module can easily adjust the voltage to the required voltage and solve the problem.

3. System working voltage test, you can use this module to debug the working voltage range of various voltage test systems when doing projects, which is very easy and convenient.

4. Applications with unstable voltages such as automotive voltage regulation, solar photovoltaic power generation, and wind power generation.

XL6019 module Red

Specification:
1.Module feature:XL6019 step up module
2.Module type:Non-isolated boost
3.Rectification method:Non-synchonous rectfication
4.Input voltage:3V-35V
5.Output voltage:5V-40V(notes can not step down voltage)
6.Input current:3A(maximum 5A)
7.Transfer efficiency:94%(The highest)Normal efficiency for 85%
8.Switching frequency:220KHz
9.Output ripple:<100mV
10.Load regulation:+-0.5%
11.Voltage regulation:+-0.5%
12.Operating temperature:-20°~+85°
13.Size:5cmx2.8cmx1.2cm(2.28"x1.10"x0.47")