SPECIFICATIONS

⚠️ Important Safety Tips:

• Do NOT connect controller directly to AC power. Always use the included transformer.

• Install all LED strips before connecting to power. Plugging in while installing may damage the main cable.

• Power off before making changes to the wiring.

• Default plug is EU plug, but we will send plug type based on your country, don't worry about the plug type!

COB Strip Technical Specifications:

• Length: 1m (3.28ft)

• Voltage: DC 24V

• LED Type: COB, 480 LEDs/m

• Color Options: 9 Colors (custom color mixing available)

• Wattage: 10W/m

• Brightness: 1000~1100LM/m

• Waterproof Rating: IP30 (Indoor Use Only)

• Cuttable: Yes (every 50mm)

• Width: 8mm

• Adhesive: Strong double-sided tape

• Installation Type: Surface or Recessed Mount (15mm hole)

Key Features:

✅ Choose Your Fit – 5 to 30 Steps:
Tailored to fit staircases of any size with easy customization — add or remove steps as needed.

✅ Smart Motion Detection:
Dual PIR motion sensors placed at both ends detect movement for seamless lighting when going up or down.

✅ Daylight Sensor for Energy Efficiency:
Lights only activate in low-light conditions, ensuring power is conserved during the daytime.

✅ Easy Installation with Main Line Cable:
All LED strips connect to a central main line — no complicated wiring required.

✅ Ultra-Bright COB LED Technology:
480 LEDs/m delivers stunning brightness (up to 1100 lumens/m) with soft, uniform lighting — visible even at 20% brightness.

✅ Remote-Controlled Modes:
Adjust brightness, timing, and step-by-step lighting effects with the included remote (battery not included).

✅ Strong Adhesive & Cuttable Design:
8mm-wide strips with industrial-grade adhesive ensure secure mounting. Cuttable every 50mm for precision fitting.

✅ Premium Build – Safe & Durable:
24V DC input for safe use, IP30 rating for indoor application, and long-lasting components.

Product Description:

Upgrade your home with our Indoor Intelligent Motion Sensor Stair Light Kit, a smart lighting solution designed to bring both safety and elegance to your staircase. Ideal for modern interiors, this kit features ultra-bright COB LED strips with motion and daylight sensors for fully automated lighting that activates as you move — step by step.

How To Use

1. Setting

Long press “Setting" to set Step Numbers, Brightness, Time Delay, Speed, Mode

Short press to“Setting" to enter next setting

After finished all setting, long press “Setting” to save all setting

2. Brightness

Brightness have 99 levels, short press to add 1 level brightness

Digital display: HH01-HH99

HH01------------------2% brightness

HH02------------------3% brightness

HH03------------------4% brightness

HH99------------------100% brightness

3.Time delay

Time delay have 99 levels, short press to add 1 level time delay

Digital display: LL01-LL99

LL01------------------4S

LL02------------------6S

LLO3------------------8S

LL99------------------200S

4. Speed

Speed have 99 levels, short press to adjust speed

Digital display: EE01-EE99

EE01------------------150ms fastest speed

EE02------------------175ms

EEO3------------------200ms

EE99------------------2600ms slowest speed

5. Set the working mode of the light strip (12 modes)

FF01------------------The first mode

FF05------------------The fifth mode

FF010------------------The tenth mode

6. Set the number of stairs

1C01 ------------------ 1st Floor, 1st floor stairs

1C05 ------------------ 1st Floor 5 Stairs

1C10 ------------------ 1st Floor 10 Stairs

2C01 ------------------ 2nd Floor, 1 Staircase

2C05 ------------------ 2nd Floor 5 Stairs

2C10 ------------------ 2nd floor 10 stairs