SPECIFICATIONS

The ERV-08-V2 timer relay is generally used in all fields (industry, housing, factories, etc.) where a time-related controller is required.




Applications and Operating Principles: Connect according to the diagram. Knob (Time Step): Time range selection.

Knob (t): Time value. For example: Time is 75 minutes. Set the "Time Step" knob to 100 m (100 minutes) and

the "t" knob to 7-8. In this case, the time is adjusted to 75 minutes. Note: To adjust for a more sensitive higher time value,

set the "t" knob at a lower stage using the timer and increase the stage to the desired time. For example: Time is 25 hours.

Set the "Time Step" knob to 10 s (10 seconds) and the "t" knob between 2-3. Turn on the power and check with the timer

for 2.5 seconds. If it is high or low, set the "t" knob again. Recheck the device. Set the "Time Step" knob to 100 h (100 hours).

In this case, you set it to be more sensitive. After setting the time, turn on the device power. The device will start timing while

the LED switch is on and off. When the device times out, the contact opens 1. When the timing is complete (set time up)
Color: As Shown
Material: plastic

Package Contents:
1* Delay Timer Relay

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.