D-C1T Hall Effect Current Sensor for 100A 200A 300A 400A 500A DC Current Transformer Transducer Output DC4V for Electrochemical

D-C1T Hall Effect Current Sensor for 100A 200A 300A 400A 500A DC Current Transformer Transducer Output DC4V for Electrochemical

$62.10

$62.10 $0.00

Color D-C1T-500A 4V D-C1T-400A 4V D-C1T-300A 4V D-C1T-200A 4V D-C1T-100A 4V

Dimensions power supply 24V power supply 12V

Description

SPECIFICATIONS

Brand Name: NONE

Galvanic isolation: @50HZ,AC,1min 2.5KV

Inner hole size: 20mm / 0.78inch

Linearity: @Ip=0 to +-Ipn <1%FS

Magnetic offset: @Ip=+-Ipn-0 +-20mV

Measure range(Ip DC): 0-150A, 0-300A, 0-450A, 0-600A, 0-750A

Model Number: D-C1T

Offset voltage: @Ip=0 +-20mV

Origin: Mainland China

Power Consumption: <25mA

Rated current(Ipn DC): 100A, 200A, 300A, 400A, 500A

Rated output: @Ip=+-Ipn 4VDC

Response time: @50A/uS, 10%-90% <7 us

Supply voltage: +12, +15V, +24V

Type: hall effect current sensor

is_customized: Yes

Dear Customers,

Thanks for visiting. As hall sensor usually require 7 days at least for preparing. So, please extend 5 days more when you make the order.Thanks so so much!!

Hope you enjoy shipping here :-)

Best Regard
Jake Gao

D-C1T series hall effect current Sensor is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC currents.

Applications:
•Variable speed drives
•Welding machine
•Battery supplied applications
•Uninterruptible Power Supplies (UPS)
•Electrochemical

Directions for use:
1. When the current will be measured goes through a Sensor, the voltage will be measured at the output end.(Note: The false wiring may result in the damage of the Sensor)
2. The output amplitude of the Sensor can be adjusted according to users' requirements.
3. Custom design in the different rated input current and the output voltage are Sensor.

Standards:
•UL94-V0.
•EN60947-1:2004
•IEC60950-1:2001
•EN50178:1998
•SJ 20790-2000