DC 12V 30W 3A Capacitive Touch Sensor Switch Coil Spring Switch LED Dimmer Control Switch 9-24V for Smart Home LED Light Strip

DC 12V 30W 3A Capacitive Touch Sensor Switch Coil Spring Switch LED Dimmer Control Switch 9-24V for Smart Home LED Light Strip

$11.07

$11.07 $0.00

Description

SPECIFICATIONS

Brand Name: Aideepen

Certification: ce,CE

Choice: yes

Current: 3A

Features: spring switch

High-concerned chemical: none

Is Smart Device: no

Item Type: SWITCHES

Material: Plastic

Model Number: spring switch

Origin: Mainland China

Switch Type: Touch On/Off Switch

Warranty: spring switch

semi_Choice: yes

Features:
1.Hard lamps or other lighting fixtures with a module size of 40mm * 10 * 1.2 (mm) and a width of>=10mm;
2.Using a wide voltage working program, it is possible to input a voltage of 9V to 24V,
3.Note that the output load voltage is approximately equal to the input voltage;
4.The module has better anti-interference and adaptability, and is widely used in civil hard light control
5.The status of this version of LED is always on.
6.This series is a four in one version of the model, The default factory setting is unidirectional dimming

Parameters:
Input voltage: 9V-24V
2. Output voltage: 9V-24V
Load power: 30W
4. Load current: 3A
Standby current: 10mA
Standby power consumption: 0.1w
7. Working temperature: -20 ° C-65 ° C
8. Type: Touch_ S (L40W10)
9. Size: 40mm * 10mm * 1.2mm
(Note: Test condition Vin=12V)
Mode Description:
Touch_ Sensor_ S00 (general switch):
S00 mode, fast switch light on/off status, no dimming function. Effect gradient.
Touch_ Sensor_ S01 (unidirectional dimming):
S01 mode, quick switch light on/off status;
In an open state, prolonged touch enters unidirectional dimming
(Maintain contact, dim to maximum or minimum brightness, automatically stop dimming),
Release the lock brightness,
Switching brightness is the final locking brightness.
In the off state, prolonged touch will darken
From the previous brightness to a brighter direction.
Effect gradient.
Touch_ Sensor_ S02 (cyclic dimming)
S02 mode, quick switch illumination on/off status;
When turned on, touch for a long time to enter cycle dimming (maintain contact and dimming to the highest or lowest brightness)
Automatically rotate the light in the opposite direction, so release the lock brightness,
Switching brightness is the final locking brightness.
When turned off, prolonged touch will darken
The previous brightness went to a brighter direction. Effect gradient.
Touch_ Sensor_ S03 (three stage dimming)
S03 mode, quick switch illumination status. Brightness three,
30%, 60%, and 100% respectively, with gradient switching effects.
Attention:
It needs to be installed before turning on the power. If a power supply is installed,
It may change environmental parameters and affect sensitivity.
Please avoid touching the spring during installation
As the electromagnetic signal in the composite contact changes,
Try to avoid using heavy water as a steam environment,
To prevent possible malfunctions.
Please understand the product's usage parameters before use