SPECIFICATIONS

Brand Name: Aideepen

Certification: NONE

Contact Load: Low Power

EU LVD Voltage: Low voltage: Below 50Vac or 75Vdc

High-concerned chemical: none

Model Number: DC 5V 12V 24V Time Delay Relay Module Delayed Connection+Delayed Disco

Origin: Mainland China

Power Source: DC

Protect Feature: Sealed

Theory: Time Relay

Use: General Purpose

Voltage: 12V

is_customized: no

DC 5V 12V 24V Time Delay Relay Module Delayed Connection+Delayed Disconnection 2nd Gear Adjustable Relay Board 0-15 minutes

Features:

1. Two kinds of delay time can be adjusted, which can be set 0-100 seconds and 0-15 minutes.

2. Two kinds of connecting time can be adjusted, which can be set 0-10 seconds and 0-100 seconds.

3. Widely used, can be used for computer startup, equipment control, signal delay and other scenes.

4. DC5V /12V /24V 3 voltage options, can be selected according to the requirements of the appropriate DC voltage.

5. Easy to operate, with power back protection function, when the power supply is connected to the wrong module will not work.

Specifications:

Type: Trigger type delay relay module (delay on + delay off)

Function: No power-on action. After triggering, delay T1, connect T2, and disconnect.

Voltage: (DC)5V, 12V, 24V three specifications

Working current: 90mA (5V), 40mA(12V), 30mA(24V)

Standby current: 6mA (measured value at 12V)

Adjustment accuracy: 0.1 seconds

Output mode: Switching type, a set of relays normally open + normally closed, passive output (that is, the contact and the power supply of this module are isolated)

Output capacity: normally open point 15A, normally closed point 10A, can control DC 0-30V or AC 0-250V.

Size: 65*21*19 (mm)

Operating temperature: -40~+85C

Working humidity: 0~90%RH no condensation

Reverse connection protection: This module has the function of power connection reverse protection. When the power supply is connected incorrectly, the module will not work.

Delay range:

T1 (Delay time):0-100 seconds, 0-15 minutes

T2(on-time) : 0-10 seconds, 0-100 seconds

Voltage tolerance:

5V modules allow between 4.6V and 6V;

The 12V module allows between 10V and 16V, and the relay should not work at high temperature for a long time;

24V modules are allowed to operate between 20V and 30V.

How to wire?

"+" and "" connect to the corresponding positive and negative terminals of the power supply

"K" is the trigger input, the external switch to" - ", when K and - are connected, a trigger will be generated

NC COM NO is the normally closed, common and normally open point of the relay respectively

Shipping list:

1X module