SPECIFICATIONS

Product Name: Direct Influencing Switch

[Start-up time] within 0.1S

【Shell material】ABS fireproof type

IP Rating: IP30

【Working temperature】-10°°C~+50°C

[Test range] DC: 1-200A

【Contact Type】Normally open/normally closed optional

【Power supply】10-30VDC

[Current threshold] can be adjusted by potentiometer

Basic functions of the product

Normally open type: When the perforation current exceeds the set value, it outputs a closed signal.

When it is lower than the set value, the switch resets and outputs a disconnect signal.

Normally closed type: When the perforation current exceeds the set value, the output disconnect signal.

When it is lower than the set value, the switch is reset and a closed signal is output.

Notes:

1. The perforated wire can only be single-phase wire

2. Select the corresponding range according to the current of the perforated wire

3. This product is an electronic switch, contacts K1 and K2 cannot use a universal meter

Direct measurement of on/off can only be observed by receiving load.

4. K1 and K2 contacts output switching quantity signal, no output voltage, no transmission

To output current, the oncoming load needs to string a power supply.

01. How to choose if there is a current contact on and no current contact is disconnected?

Answer: Choose the normally open one (the opposite of the normally closed)

02. When the welding machine starts, the linkage fan starts, how to choose?

Answer: Choose the usual open (linkage function)

03. Can I give the PLC signal directly?

A: Yes.

04. What is the minimum starting value, and the equipment current is only 0.05A,

Can it be detected?

Answer: Yes, the perforated wire needs to be wrapped around 4 times.

05. Can the current start value be adjusted?

A: Yes, there is a regulator.

06. Can the relay be controlled to suction or disconnect?

A: Yes.

07. Can I pick up the buzzer? If the current exceeds the buzzer, call the worker

Do you do it?

A: Yes, current overload alarm.

08. Can multiple strands pass through at the same time?

Answer: No, only one phase of electricity can be worn.

09. Can it be closed when there is no current?

Answer: Yes, choose the normally closed type.