SPECIFICATIONS

Brand Name: NONE

Choice: yes

High-concerned chemical: none

Material: Polymer

Origin: Mainland China

Output: Switching Transducer

Theory: Inductance Sensor

Type: Optical-Electronics Sensor

Use: 24GHz Radar Sensor

When someone walks into the sensor and reaches the lighting requirement, the microwave switch is automatically turned on, the load electrical appliance starts to work, and the delay system is activated. As long as the human body does not leave the induction area, the load electrical appliance will continue to work. When the human body leaves the induction area, the sensor starts to calculate the delay, and when the delay ends, the sensor switch is automatically turned off, and the load electrical appliance stops working. Truly, safe, convenient and intelligent, energy saving.

Two product features:
1. The induction is sensitive, and the movement of living and non-living bodies can be accurately identified, so that the error rate is reduced to a very low level.
2. Strong anti-interference: using 5.8GHz operating frequency, it is less affected by external natural factors, and the performance is stable and reliable.
3. Automatic metering: Automatically identify the intensity of ambient light, meet the lighting requirements and light up when there are people. Otherwise it does not light up.
4. Fully automatic induction: automatically turn on the lights after sensing people, turn on the lights when people come, and turn off the lights when people leave, safe and power-saving, free from external influences such as sound and objects.

Parameters:
Working voltage: AC85-250V
Standby power consumption: 0.9W
Transmit power: <10mA
Operating frequency: 5.8GHz
Induction distance: 2-16 meters (adjustable)
Working delay: adjustable from 8 seconds to 12 minutes
Light control illumination: 2-200LUX adjustable
Load power: 800W (resistive load) 200W (capacitive load)
Four notes:
1. Please disconnect the power supply before installation to avoid danger
2. The product is not waterproof, please pay attention to moisture-proof and waterproof.
3. The microwave induction angle is 360 degrees, please pay attention to the installation method.
4. There is high voltage inside the product, non-professionals should not disassemble or assemble it, otherwise the consequences will be at your own risk.
The induction illumination can be adjusted, the induction distance can be adjusted, and the delay time can be adjusted.
Sensing angle: built-in antenna surface 360 degrees;
Can be applied to any load: monitoring, alarm equipment, LED lamps, fluorescent lamps, incandescent lamps, exhaust fans, solenoid valves, etc. It can be installed in all lamps as induction lamps, and can also be sensed through the lampshade.
Humanized extended induction design: If someone continuously moves in the induction area, the induction signal will automatically change to prolong the induction time, and will not wait for the light to go out and re-sensing.
The wiring method is more scientific than other products, we have designed 2 inlet holes and 2 outlet holes. Easy wiring. And use a pluggable terminal. Easy and quick installation.

Product List:
1*Microwave radar sensor switch