DWIN 4.3/7.0/10.1 DGUS2 Commercial Grade HMI LCD Display Resistive Touch Screen With Shell Connect With PLC/Arduino/STM32

DWIN 4.3/7.0/10.1 DGUS2 Commercial Grade HMI LCD Display Resistive Touch Screen With Shell Connect With PLC/Arduino/STM32

$169.65

$169.65 $0.00

Color 7.0 Inch 4.3 Inch 10.1 Inch Accessories

Description

SPECIFICATIONS

Brand Name: DWIN

Display Mode: None

High-concerned chemical: none

Model Number: DMG80480C070_15WTR,DMG48270C043_15WTR,DMG10600C101_15WTR

Operating Humidity: 10%~90%RH

Operating Voltage: 6~36V

Origin: Mainland China

Rated Power: <5W

Resolution: 800x480

Three-proof Paint: None

User interface: 8Pin

With Enclosure: yes

Working Temperature: -20℃~70℃

is_customized: Yes

Features

Based on T5L, running DGUS II system, commercial grade.
4.3 inch/7.0 inch/10.1 inch are optional.
Resistive touch screen.
With enclosure.
Support RS232 and RS485 communication.

Display parameters
Model		DMG48270C043_15WTR
LCD Type		TV-TN, TFT LCD
Viewing Angle		TV viewing angle, 70°/70°/40°/30°（L/R/U/D）
Resolution		480×272 pixels (support 0°/90°/180°/270°)
Color		18-bit 6R6G6B
Active Area (A.A.)		95.00mm (W)×53.90mm (H)
Backlight Mode		LED
Backlight Service Life		>10000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness		250nit
Brightness Control		0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)

Touch parameters
Type		RTP (Resistive touch panel)
Structure		ITO film + ITO glass
Touch Mode		Single point touch, support continuous sliding touch
Surface Hardness		3H
Light Transmittance		Over 80%
Life		Over 1,000,000 times touch

Serial interface parameters
Mode	UART2: RS232 UART4: RS485（Only available after OS configuration)
UART2 Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1		-	-5.0	-3.0	V
	Output 0		3.0	5.0	-	V
	Input 1		-15.0	-5.0	-	V
	Input 0		-	5.0	15.0	V
UART2 Baud Rate	3150~3225600bps, typical value of 115200bps
UART4 Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1		2.5	5.0	-	V
	Output 0		-	-5.0	-2.5	V
	Input 1		0	2.5	-	V
	Input 0		-	-2.5	-0.2	V
UART4 Baud Rate	3150~921600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (OS configuration)
Interface Cable	8Pin_2.0mm (Note: You need to change the line sequence of the cable HDL65011 and HDL65013 to use.)

Electrical specifications
Rated Power		<5W
Operating Voltage		6~36V, typical value of 12V
Operating Current		109mA	VCC=12V, max backlight
		50mA	VCC=12V, backlight off
Recommended power supply: 12V 1A DC

Display parameters
Model		DMG80480C070_15WTR
LCD Type		TN, TFT LCD
Viewing Angle		Normal viewing angle, 70°/70°/50°/70°（L/R/U/D）
Resolution		800×480 pixels (support 0°/90°/180°/270°)
Color		18-bit 6R6G6B
Active Area (A.A.)		154.1mm (W)×85.9mm (H)
View Area (V.A.)		-
Backlight Mode		LED
Backlight Service Life		>20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness		200nit
Brightness Control		0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)

Touch parameters
Type		RTP (Resistive touch panel)
Structure		ITO film + ITO glass
Touch Mode		Single point touch, support continuous sliding touch
Surface Hardness		3H
Light Transmittance		Over 80%
Life		Over 1,000,000 times touch

Serial interface parameters
Mode	UART2: RS232 UART4: RS232 (Only available after OS configuration) UART5: RS485 (Only available after OS configuration)
UART2,4 Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1		-	-5.0	-3.0	V
	Output 0		3.0	5.0	-	V
	Input 1		-15.0	-5.0	-	V
	Input 0		-	5.0	15.0	V
UART2,4 Baud Rate	3150~3225600bps, typical value of 115200bps
UART5 Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1		2.5	5.0	-	V
	Output 0		-	-5.0	-2.5	V
	Input 1		0	2.5	-	V
	Input 0		-	-2.5	-0.2	V
UART5 Baud Rate	3150~921600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (OS configuration) UART5: N81/E81/O81/N82 ,4 modes (OS configuration)
Interface Cable	8Pin_3.81mm Socket

Electrical specifications
Rated Power		<5W
Operating Voltage		6~36V, typical value of 12V
Operating Current		240mA	VCC=12V, max backlight
		140mA	VCC=12V, backlight off
Recommended power supply: 12V 1A DC

Display parameters
Model		DMG10600C101_15WTR
LCD Type		IPS, TFT LCD
Viewing Angle		Wide viewing angle, 85°/85°/85°/85° (L/R/U/D)
Resolution		1024×600 pixels (0°/90°/180°/270°)
Color		24-bit 8R8G8B
Active Area (A.A.)		223.2mm (W)×125.8mm (H)
View Area (V.A.)		-
Backlight Mode		LED
Backlight Service Life		>20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness		250nit
Brightness Control		0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)

Touch parameters
Type		RTP (Resistive touch panel)
Structure		ITO film + ITO glass
Touch Mode		Single point touch, support continuous sliding touch
Surface Hardness		3H
Light Transmittance		Over 80%
Life		Over 1,000,000 times touch

Serial interface parameters
Mode	UART2: RS232 UART4: RS485 (Only available after OS configuration)
UART2 Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1		-	-5.0	-3.0	V
	Output 0		3.0	5.0	-	V
	Input 1		-15.0	-5.0	-	V
	Input 0		-	5.0	15.0	V
UART2 Baud Rate	3150~3225600bps, typical value of 115200bps
UART4 Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1		2.5	5.0	-	V
	Output 0		-	-5.0	-2.5	V
	Input 1		0	2.5	-	V
	Input 0		-	-2.5	-0.2	V
UART4 Baud Rate	3150~921600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (OS configuration)
Interface Cable	8Pin_3.81mm Socket

Electrical specifications
Rated Power		<5W
Operating Voltage		6~36V, typical value of 12V
Operating Current		350mA	VCC=12V, max backlight
		120mA	VCC=12V, backlight off
Recommended power supply: 12V 1A DC

FAQ

Question 1:

How can I start development with a DWIN LCD Module? Can I assemble it directly on my machine?
Answer:

No, you should update the program to LCD at first, and then assemble it.
Step 1, check the software platform of the screen, it mentioned in datasheet.
Step 2, use the correct development SDK (different platform use different SDK) to finish developing.
Step 3, update software program and test
Step 4, when test OK, assemble it on machine.

Question 2:

What industries are DWIN LCD used in?
Answer:

Beauty machine, Physical therapy, Health and fitness, Medical treatment, Air treatment, Air control, Transportation (Car &ship instruments), instruments and apparatus automation, Electricity, Water treatment, IC design and manufacture, Kitchen appliances (Juicer, oven, ice machine, ice-cream machine, kitchen ventilator), New energy(Photovoltaic, Wind electricity, Charging Pile), Household appliances…

Question 3:

Does DWIN product need a MOQ when purchase?
Answer:

No MOQ for standard product.

Question 4:

Will DWIN have online technical support?
Answer:

Yes,of course, below ways you can get technical support.

- Whatsapp: +86 19192113166
- Customer service email: dwinhmi@dwin.com.cn

- DWIN Developer Forum:https://forums.dwin-global.com/

- International website:https://www.dwin-global.com/

- Development tool:https://www.dwin-global.com/tool-page/

- Development guide:https://www.dwin-global.com/development-guide/

- DGUS video tutorial:https://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/
- Leave messages to us on Aliexpress.

Free Shipping Over $199