SPECIFICATIONS

25mm 30mm Click on the following picture

Black Color Click on the following picture

Screw Foot Click on the following picture

Notice: 8mm 10mm Led button must be connected to the outside resistor when used. Otherwise it will burn out

Notice: The welding must be completed within 3 seconds, otherwise the inside will be damaged easily

Specification

If you need special specifications, please feel free to contact customer service,we can customize it .

Contact:sterling silver
Material: Nickel Brass
Color: Silver
LED color: White Yellow Red Green Blue
Switch Rating: 3A /250VAC
Waterproof Grade: IP65
LED Voltage: 3-6V,12V,24V,220V
Operation Type: Momentary and Latching
Hole size: 8/10/12/16/19/22mm

Voltage Selection

3V-6V :3V 5V 6V
12V-24V: 12V 24V
220V: 220V 230V
Other voltages are required. Please contact customer service
No led switch button can be applied to 2-250V.

Pin Terminal Introduction

"+": positive pole of the led
" - ": negative pole of the led
" NC ": Normal Close
" NO ": Normal Open
" C " : Common
Connect " NO " and " C " : The circuit is alway open unless press the button.
Connect " NC " and " C " : The circuit is alway close unless press the button.

Operation Type :Momentary

After pressing the button ,press-key will return automatically If you don't continue to press the button.Self-reset.

Operation Type:Latching Fixing

After pressing the button ,press-key stay in a position
until it is pressed again, then it return.

8mm Button

8mm Button (which is momentary and no led ) only has Camber Head. Other 8mm button only has High Head.
8mm Led button must be connected to the outside resistor when used
Please allow 0.1-0.3mm differs due to manual measurement,8mm

10mm High Head Button

10mm Led button must be connected to the outside resistor when used
Please allow 0.1-0.3mm differs due to manual measurement,

12mm Momentary Button

Please allow 0.1-0.3mm differs due to manual measurement,

16mm Flat Head Button

Please allow 0.1-0.3mm differs due to manual measurement,

19mm Flat Head Button

Please allow 0.1-0.3mm differs due to manual measurement,

22mm Flat Head Button

Please allow 0.1-0.3mm differs due to manual measurement,

Flat Head

High Head

Camber Head

Wiring Diagram

There are many wiring method, the picture below is just for reference

Wiring Diagram of Normal Open

When the switch is pressed, the LED lights up and the load is energized. After press-key return, the load is de-energized, and the light is off.

Wiring Diagram of Normal Close

The load is energized.When the switch is pressed, the LED lights up and the load is de-energized. After press-key return, the load is energized, and the light is off.

Features

Made of metal material, strong and durable. High-grade appearance and nice touch feeling. Adopt rubber ring and hexagonal nut fixed, anti dust and waterproof, which make it great for outdoors use. Copper plating silver terminals for good conductive properties. Momentary type, push it-on, release it-off. Metal button head durable for longstanding press.