ESP8266 ESP-W&ROOM-32 ESP32-WROVER Development Board Test Programmer Socket Downloader Burning Fixture Tool for ESP-12F/07S/01

ESP8266 ESP-W&ROOM-32 ESP32-WROVER Development Board Test Programmer Socket Downloader Burning Fixture Tool for ESP-12F/07S/01

$22.36

$22.36 $0.00

Description

SPECIFICATIONS

Application: Computer

Brand Name: EC Buying

Condition: New

Dissipation Power: low

ESP8266 ESP-W&ROOM-32 Development Board: Test Programmer Socket Downloader Burning Fixture Tool for ESP-01 ESP-12S ESPW&ROOM-32

ESP8266 ESP-W&ROOM-32 ESP32-WROVER: Esp32 Development Board Esp32 Test Board Burning Fixture Tool Downloader for ESP-12F/07S/12S

High-concerned chemical: none

Operating Temperature: normal

Origin: Mainland China

Package: module

Smart Electronics Experiment: Switch And Sensor For Arduino STM32

Supply Voltage: -

Type: Voltage Regulator

is_customized: Yes

ESP-W&ROOM-32 Burning Fixture Tool

Suitable for firmware burning test of four modules: ESP-W&ROOM-32, ESP-W&ROOM-32D / ESP-W&ROOM-32U / ESP32-SOLO-1

Interface Description:

Lead out all IO ports, can be used as the smallest system development board or small batch burning fixture

Instructions for use:

1. Download the corresponding CP2102 serial chip driver according to the operating system and install it

2. Download the official FLASH download tool ESPFLASHDOWNLOADTOOL

3. Automatically download the firmware: press the module, insert the USB cable to supply power, cooperate with the FLASH download tool, configure the corresponding burning parameters, click START to download, the firmware burning will start, the downloader will automatically reset and make the module enter the burning mode

Manually download the firmware: Automatically download the firmware: press the module, insert the USB cable to power, open the burning software, configure the corresponding burning parameters, long press the burn button, then short press the reset button, click START to download, you can start the firmware Burn

ESP8266 Burning Fixture Tool

This fixture does not include the ESP8266 module. This board is suitable for fixed burning testing of modules such as ESP-12S/2F/12E/07S/07.

All IO ports have been led out, which can be used as the minimum system development board or a fixture board for small batch burning. It supports one click firmware download function and has added a burning mode indicator light (blue light) and a serial communication indicator light (green light)

1. Download the corresponding CP2104 serial chip driver according to the operating system and install it.

2. Download FLash Download Tool ESPFLash Download Tool

3. Automatic download fixation: Press in the module, turn on the power switch, and use FLash download tool Configure the desired burning parameters and click START to download Start firmware burning immediately, the downloader will automatically reset and the module will enter burning mode.

4. Manual firmware download: Press in the module, turn on the power switch, open the burning software, configure the corresponding burning parameters, long press the burning button, then short press the reset button, and then click START download to start burning the firmware. The downloader is suitable for modules such as ESP-12S/ESP-12F/ESP-12E/ESP-07/ESP-07S. When the burn button is pressed, the blue burn indicator light will light up and the I00 pin of the ESP8266 module will be pulled down. For information on how to enter burn mode for the module, please refer to the relevant documentation.