SPECIFICATIONS

Brand Name: FunnyShield

Channel: 2

Choice: yes

Feature 1: wireless single-way remote control switch

Feature 2: Micro Remote Control Switch

Feature 3: 433Mhz RF Wireless Controllers

Feature 4: for Motor Forwards Reverse Stop/DIY

Feature 5: RF Mini Motor Remote Control Switch

Feature 6: LED Light Controller DIY Kit

Feature 7: DC 6V 12V 18V 24V Relay Module

Feature 8: 433Mhz 1 CH RF Relay Receiver

Feature 9: Small Relay Contact Wireless Switches

Form-factor: Others

Frequency: 433 MHz

High-concerned chemical: none

Model Number: 433mhz Wireless Remote Control

Origin: Mainland China

Package: Yes

Support APP: No

Use: Universal,Automated curtains,Electric Door,Lighting,Switch,Accessories for Remote Controls

Wireless Communication: RF

Working voltage: DC 3.6V~24V

Maximum load: 2A

Static current: <5 mA

Working frequency: 433MHz

Reception sensitivity:<-108dBm

Mini size support coding format 1527 learning code

Input: DC 3.6V ~ DC 24V

Output: DC 3.6V ~ DC 24V

Modulation mode: ASK (superheterodyne)

Number of stored remote controls: ≤ 5

Working mode: Momentary, Toggle, Latching Mode

Learning style: Learning Button

Working temperature: -20 degrees 80 degrees.

Clear the code: (clear the code before switching modes)

Press the learn code button 8 times, and the LED will go out. The LED flashes 5 times, and the OK is cleared.

(If you need to change the working mode of the same remote controller, please clear the code before learning.)

Learn to check the code:

1. Clear code

Press the learning key on the module eight times continuously, and the indicator light will flash six times quickly.

Then put it out. Clear the code successfully. All the remote controls that can be controlled before are invalid.

2, inching mode

Click the learn button once, and the LED will be on after flashing once. Press the button that the remote controller wants to control.

Press the key, and the LED light flashes three times, and the learning is successful.

3. Self-locking mode

Press the Learn button twice, and the LED will be on after flashing once. Press the button that the remote controller wants to control.

Press the key, and the LED light flashes three times, and the learning is successful.

4. Interlock mode

Press the Learn button for 3 times, and the LED will be on after flashing once. Press the button that the remote controller wants to control.

Press the key, and the LED light flashes three times, and the learning is successful.

5, inching delay mode

Click the Learn button for 4 times, and the LED will be on after flashing for 4 times. Press the button that the remote controller wants to control.

Press the key, the LED light flashes three times, and the learning point is delayed for 5 seconds. Press the learning button for 5 times, and the LED will always turn on after flashing for 5 times. Press the button that the remote controller wants to control, and the LED will flash for 3 times, and the learning inching will be delayed for 10 seconds. Press the learning button for 6 times, and the LED will always turn on after flashing for 6 times. Press the button that the remote controller wants to control, and the LED will flash for 3 times, and the learning inching delay will be 15 seconds. Press the learning button for 7 times, and the LED will always turn on after flashing for 7 times. Press the button that the remote controller wants to control, and the LED will flash for 3 times, and the learning inching delay will be 20 seconds.