SPECIFICATIONS

1. Product features:

1. Meet UL and CE requirements,

2. Ultra thin and ultra small

2. Full voltage input (90-264Vac)

3. Low ripple and low noise

4. Output overload and short circuit protection function

5. High efficiency and high power density

2. Environmental conditions

Working temperature: -20 ℃~+60 ℃

Storage temperature: -40 ℃~+80 ℃

Relative humidity: 5%~95%

Heat dissipation mode: Free cooling

Atmospheric pressure: 80Kpa~106Kpa

Altitude: ≤ 2000m

Vibration: Vibration coefficient 10~500Hz, 2G10min/ 1cycle, 60min.each along X,Y,Z axes

3. Electrical characteristics

Input characteristics (tested at room temperature)

Rated input voltage: 100-240VAc

Input voltage range: 90-264VAc

Input current: ≤ 0.2A

Input surge current: ≤ 10A

Input voltage: ≤ 270VAc

Input slow start: ≤ 50mS

Input low voltage efficiency: Vin=110VAc, output full load ≥ 69%

Input high voltage efficiency: Vin=220VAc, output full load ≥ 70%

Long term reliability: MTBF ≥ 100000

Rated no-load output voltage:+5 ± 0.1VDc

Full load rated output voltage:+5 ± 0.2VDc

Short time output current: ≥ 1000mA

Long term output current: ≥ 600mA

Voltage regulation rate: ± 0.2%

Load adjustment rate: ± 0.5%

Output ripple and noise (mVp-p): ≤ 50mV

Rated input voltage, output full load. Test with a 20MHz bandwidth oscilloscope and 10uF and 0.1uF capacitors at the load end.

Switching machine overshoot amplitude: (rated input voltage, output plus 10% load) ≤ 5% VO

Output overcurrent protection: 150-200% A of output load

Output short circuit protection: Direct short circuit during normal output, automatic restoration of normal operation after short circuit removal

4. Safety characteristics:

4.1 The product design meets UL and CE safety certification requirements.

4.2 Safety and Electromagnetic Compatibility

The input design adopts UL certified 0.5A insurance;

The PCB board is made of double-sided copper foil, and the material has a fire resistance rating of 94-V0;

Safety standards comply with UL1012, EN60950, UL60950

Insulation voltage I/P-O/P: 2500VAC

Insulation resistance I/P-O/P>100M Ohms/500VDC 25 ℃ 70% RH

Conduction and radiation comply with EN55011, EN55022 (CISPR22)

Electrostatic discharge IEC/EN 61000-4-2 level 4 8kV/15kV

Radio frequency radiation immunity IEC/EN 61000-4-3, see application instructions for details

4.3 Design of temperature rise safety regulations

At room temperature, the internal surface temperature rise of the power supply capacitor, main converter, etc. shall not exceed 90 ℃;

The surface temperature rise of the shell shall not exceed 60 ℃;

5. Marking, packaging, transportation, and storage

5.1 Marking

5.1.1 Product logo

Label the product at an appropriate location, with content that complies with national and industry standards.

5.1.2 Packaging marks

The product packaging box is marked with the manufacturer's name, address, postal code, product model, factory year, month, and day;

Transport signs such as "up", "moisture-proof", and "handle with care" are marked, all of which comply with the provisions of GB 191.

5.2 Packaging

The product is packaged in a dedicated blister box with anti vibration function and complies with the provisions of GB 3873.

5.3 The packaged products can be transported by any means of transportation, and should be covered during transportation without severe vibration, impact, etc

5.4. The storage of products should comply with the provisions of GB 3873.