IM-T150 150A 3 Phase AC Latching Relay with Auxiliary Switch Optional

IM-T150 150A 3 Phase AC Latching Relay with Auxiliary Switch Optional

$137.97

$137.97 $0.00

Size 2 Coil 12V With AC 1 Coil 24V None AC 2 Coil 24V None AC 2 Coil 24V With AC 2 Coil 12V None AC

Current Range150A

Description

SPECIFICATIONS

Brand Name: IVY METERING

Contact Form: 3A/3B

Contact Load: High Power

Contact Material: AgSnO2

Contact Resistance: <2mΩ

EU LVD Voltage: Low voltage: Below 50Vac or 75Vdc

Electrical Endurance: 10000 Cycles

High-concerned chemical: none

Mechanical Endurance: 100000 Cycles

Model Number: IM-T150

Origin: Mainland China

Pick-up Time: ≤50ms

Power Source: Ac,Ac

Protect Feature: Sealed

Rated Load: 150A 250VAC

Release Time: ≤50ms

Size: 110mm\68mm\35mm

Theory: Electromagnetic Relay

Use: General Purpose

Voltage: 250V

is_customized: Yes

Basic Data	Dimension(mm)		110×68×35
	Weight ( g )		/
	Contact Arrangement		3A/3B
	Contact Material		AgSnO2
	Ambient Temperature		-40~70ºC
	Ambient Humidity		45%~90%RH
	Vibration		10~55Hz,1.5mm(DA)
Specification Data	Nominal Voltage		6~48VDC
	Power Consumption		Single Coil:3.0W, Dual Coil:6.0W
	Max. SwitchingVoltage		250VAC
	Max. Switching Current		150A
	Max. Switching Power		37500 VA
	Contact Resistance		<2.0 mΩ
	Insulation Resistance		1000MΩ(DC 500V)
	Dielectric Creepage		8 mm
	Dielectric Strength	Across Open Contact	>2000VAC 1min
		Coilto Contact	>4000VAC 1min
	Electrical Life		10,000cycles
	Mechanical Life		100,000cycles
	Picking-up & Release Time		<=50ms
	Pulse Duration		100 ms
	Functional Shock Resistance		10G
	Destructive Shock Resistance		100G

Cautions of Latching Relay
1.Suggestions of relay's input
(1)Polarity-Please check the polarity inside of our technical specification, if single coil then"+ -" or "- +"are fine,

you can change it by one pulse.If double coil then it's necessary to confirm "-+-" or "+-+"before leaving the our factory.

(2)Driving-Please energize the relay at our recommend pulse width, rated voltage for reliable performance, if 1.5

times or 2 times of value or lower driving condition plz confirm with our engineer.
(3)Relays'contact status may be changed during transportation or installation due to impact of external force,
therefore please reset to the required status.

2.Suggestions of relay's output
(1)When choosing the relay with hard connection,please avoid the external force on load terminals during or after

the installation.

(2)When the relay will be connected with screw or bolts to the relays' terminals, plz make sure your connection is

fastened and prevent relay from damages or other safety problems due to temp. Rise..

(3)The sampling signal wires of products are limited, please do not pull or torque during installation.

Free Shipping Over $199