SPECIFICATIONS

Brand Name: U-Angel-1988

Choice: yes

For Vehicle Type: Airplanes

Four-wheel Drive Attributes: Assemblage

High-concerned chemical: none

Material: Metal

Model Number: ISDT 608PD Lipo Balance

Origin: Mainland China

Quantity: 1 pcs

RC Parts & Accs: Batteries - LiPo

Recommend Age: 14+y

Remote Control Peripherals/Devices: Battery Charging Units

Technical parameters: value 2

Tool Supplies: Assembly Category

Upgrade Parts/Accessories: Lithium Battery

Use: Vehicles & Remote Control Toys

Wheelbase: Screws

⚡【Support
daul mode input: DC 240W/USB-C 140W】 The ISDT 608PD lipo battery
charger is new generation of pocket chargers. It supports DC 240W high
power, max.10A charging current and USB-C (PD3.1)140W input, max. 5A
current, which can be 2~6S lithium/life/ liion/ lipo/lihv/1~16s ni-mh/cd
battery charger. Committed to being the best lipo charger for your RC
car, plane, drone, spektrum or traxxs batteries.

⚡【RC battery
charger with power mode! 】ISDT 608PD is equipped with a bidirectional
USB-C port, which not only supports 140W input, but also supports 100W
output. When the RC battery is used as a power source, it can charge our
mobile phones, laptops and MacBooks with a maximum output power of
100W. Yes, it is not only a 6s 240W lipo charger, but also a 100W USB C
PD charger! The design allows energy to be diverted to save energy.
(Power adapter and cable not included!!!)

⚡【More worry and time
saving】The new generation 608PD supports preset 5 battery types and
battery parameters. One-click charging simplifies the operation steps
for us. Charging operation is faster!

⚡【IPS Screen:Low power
consumption】 The lipo balance charger with a 1.5” IPS screen,
auto-brightness adjustable, 178°visible angle，display clear and distinct
even in varies hard environment or angles as well as in strong
sunshine, reduce light damage to user’s eyes.

⚡【ISDT 6S charger
with cooling fan】Advanced crafty cooling air duct ，Active cross-flow
cooling air duct design, initiative ball bearing cooling fan, with
accurate designed aluminum alloy fins and Hi-Tech silicon heat conduct
pad, built up a High efficiency heat dissipation system.

⚡【Support
"ISDLink" APP Remote Control 】In APP, you can perform an OTA upgrade of
your lipo charger, preset charging tasks, monitor the charging process
at any time. Wirelessly operate, awesomely simple. Besides, you also can
upgrade the charger on PC by USB port.

【Note】 When 608PD uses
PD input, if the computer is used as the power supply, the machine
switch key will be locked due to insufficient power, but the app can
operate the switch. Therefore, it is recommended to connect a power
supply that supports PD output power.

Parameter

Maximum Input Current: DC 10A,USB-C 5A

Input voltage range: DC 5-30V, USB-C 5-28V

Output Voltage Range: DC 3.0~30V

Charging Current: 0.5~10.0A

Maximum charging power: 240W/10A

Maximum Discharge Power: USB-C 100W/5A （power mode

Support battery type and series: LiFe,LiPo,LiHv(4.35V~4.50V)1-6S/Pb 1-12S/NiMH 1-16S

Balance Current: 0.8A/Cell Max

Operating Temperature: 0~40℃ Storage Temperature: -20~60

Abnormal battery voltage alarm: Support

Alarm for string number setting error: Support

Dimension: 72.5×60×26.6mm

Weight: 85g(±10%)