SPECIFICATIONS

Application: For Arduino With UNO R3 Or Nano Board

Brand Name: keyestudio

CNC Shield: V2.0/V3.0/V4.0

Choice: yes

Compatible with: GRBL

Condition: New

High-concerned chemical: none

Operating Temperature: 0-40

Origin: Mainland China

Package: DIP

Stepper drivers: A4988, DRV8825

Type: Voltage Regulator

is_customized: Yes

V2 KIT

Specification

1. Keyestudio CNC Shield Version 2.0 2. GRBL 0.8c compatible. (Open source firmware that runs on an Arduino V4.0 board that turns G-code commands into stepper signals) 3. 3-Axis support (X, Y, Z , ) 4. 2 x End stops for each axis (6 in total) 5. Spindle enable and direction 6. Coolant enable 7. Uses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others) 8. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) 9. Compact design. 10. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. 11. Runs on 12V DC.

Kit list:

1x keyestudio CNC Shield V2.0

1x keyestudio V4.0 board

3x A4988 Driver

1x USB Cable

V3 KIT & 4988 Driver

Specification:

Latest Keyestudio CNC Shield Version 3.0

GRBL 0.8c compatible. (Open source firmware that runs on a keyestudio V4.0 board that turns G-code commands into stepper signals)

4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)

2 x End stops for each axis (6 in total)

Spindle enable and direction

Coolant enable

Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)

Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )

Compact design.

Stepper Motors can be connected with 4 pin molex connectors or soldered in place.

Runs on 12V DC.

Kit list:

1x Keyestudio CNC Shield V3.0

1x keyestudio V4.0 Board

4x A4988 Driver

1x USB Cable

V4 KIT

Specification:

1.3 axis stepper motor driver

2.Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.

3.2A can be controlled within the two-phase four-wire stepper motor.

4.Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.

5.Released the I2C interface, you can connect to the LCD I2C or other I2C module.

6.power DC5v interface, 7.5-12V voltage input.

7.GRBL compatible

8.worked with arduino nano.

Kit list:

1x CNC Shield V4.0

1x nano board

3x A4988 driver

1x USB cable

V3 KIT &8825 Driver

Introduction:

Keyestudio CNC Shield V3.0 can be used as driver expansion board for engraving machines.

It has total 4 channel slots for DRV8825 stepper motor driver modules (not included) for driving 4 channel of stepper motors. Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports is sufficient to manage 3 stepper motors.

This shield can make quick work for managing stepper motors in your project.

Specification:

Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Stepper Motors can be connected with 4 pin molex connectors or soldered in place.Compact design.Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )Uses removable Pololu DRV8825 compatible stepper drivers. (A4988, DRV8825 and others)Coolant enableSpindle enable and direction2 x End stops for each axis (6 in total)4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)Latest Keyestudio CNC Shield Version 3.0