SPECIFICATIONS

PRODUCT FEATURES:
Wide range input: 85-264VAC/70-350VDC
Input and output isolation withstand voltage: 3000VAC
No-load power consumption: ≤0.7W
Operating temperature range: -25°C~+60°C
Fully enclosed plastic shell, in line with: UL94V-0 level
Good output short circuit and over current protection and self-recovery
Using high-quality environmental protection waterproof thermal conductive glue potting, dust-proof, moisture-proof, shock-proof, flame retardant

Working temperature: -25~+75℃
Storage temperature: -4O~+85℃
Relative humidity: 10~90%RH
Cooling method: natural cooling
Atmospheric pressure: 80~160Kpa
Altitude: ≤200Om
Vibration: Vibration coefficient 10~500Hz, 2G 1Omin./ 1-cycle6Omin.each along X,Y,Z axes to meet secondary road transportation requirements

Input characteristics (room temperature test)
Rated input voltage: 90-245VAC
Input voltage range: 85-264VAC/70-350VDC
Maximum input voltage: ≤270VAC
Input current: ≤0.2A
Inrush current: ≤10A
Input slow start: ≤50mS
Recommended value of external insurance: 0.5A/25OVAC slow-break fuse
Input voltage efficiency: ≥69%/70% (110/220VAC)
Hot swap: not supported

Output characteristics
Voltage adjustment: ±0.2%
Load Regulation: ±0.5%
Switching machine overshoot range: 5mS(115VAC)/6omS(220VAC)
Output short circuit protection: ≤5%V.
Ripple & Noise: ≤70mVp-p(Tpy:5O)

1.  Product features:                          

1. Meet UL, CE requirements,                                         

2. Ultra-thin, ultra-small

3. All voltage input (AC: 90 ~ 240V)                                  

4. Low ripple and low noise

5. Output overload and short circuit protection

6. High efficiency, high power density

7. The product is designed to meet the requirements of EMC and Safety Test

8. Low power consumption, environmental protection, no-load loss <0.1W

9.100% load aging and testing

10.1 year warranty perio

2. Environment Condition

3.Electrical Characteristic

1. Input characteristics (test at room temperature 20 C).

4.Safety Characteristics:

4.1 Products designed to meet UL, CE safety certification requirements.

 4.2 Safety and electromagnetic compatibility

Designed with the input of 0.5A UL certified insurance;

PCB board using double-sided copper clad plate production, material for the 94-V0 fire rating level;

Safety standards: Compliance with UL1012, EN60950, UL60950

Insulation voltage: I / P-O / P: 2500VAC

Insulation resistance :I / PO / P> 100M Ohms / 500VDC 25 C  70% RH

Conduction and radiation :comply with EN55011, EN55022 (CISPR22)

Electrostatic discharge :IEC / EN 61000-4-2 level 4 8kV / 15kV

RF radiation Immunity: IEC / EN 61000-4-3 See Application Note

4.3 Temperature safety design

At room temperature,the capacitors of this power , the inner surface of the main converter maximum temperature does not exceed 90 C;

Shell maximum surface temperature does not exceed 60 C

5.Logo, packaging, transportation, storage

5.1 Logo

5.1.1 Product logo

In place of products labeled with signs, its content in line with national standards, industry standards.

5.1.2 Packaging logo

      Products marked with the manufacturer's name, address, zip code, product type, manufactured year, month, day on the box ;

Marked "up", "moisture" "Handle with care" and other transportation signs, all signs are in line with the provisions of GB 191.

5.2 Packaging

Products are separated using special plastic box packaging, with anti-vibration function, and in accordance with the provisions of GB 3873.

5.3 Transport

 packaged products can be shipped by any transportation service, there should be awnings in transport and no excessive vibration, impact, etc.

5.4 Storage

Products should be stored in compliance with GB 3873