SPECIFICATIONS

LUXIANZI Desoldering Wire 1/1.5/2/2.5/3/3.5Mm Width 1.5M Length Desoldering Braid For Soldering Desoldering Mesh Welding

Features：
➤ Flat knitting:
It has fast heat conduction and is suitable for rapid tin absorption, which reduces the risk of thermal damage to the circuit board;

➤ Copper wire + chemical formula:
Refined from pure copper + special chemical formula, it is resistant to oxidation and corrosion, good thermal conductivity, and clean tin absorption;

➤ Widely used:
Used in manual welding and automatic soldering equipment, refined from high-purity raw materials, and widely used in the electronics assembly industry.

How to use the "Tin Absorption Belt"?
1. When removing the soldering spot solder, firstly dip the front of the soldering strip with rosin, and then place the soldering strip on the solder joint that needs to be unsoldered, and then place the electric iron on the soldering strip.
2. The solder joints are heated, so that when the solder is melted, it will be sucked away by the tin absorption belt, and the purpose of desoldering is achieved.
3. If the solder is not completely sucked off at one time, it can be sucked repeatedly many times until the components can be removed.
4. After de-soldering, cut off the tin strip that has absorbed the solder to prepare for the next use.
5.The provided cleaning sponge is used for cleaning the soldering iron tip. The sponge needs to be soaked with a little water, and then the soldering iron tip is rubbed on the cleaning sponge for a few times. The soldering iron tip is immediately refreshed, which makes the repair and welding more convenient and makes the soldering iron tip longer service life

Note: In order to prevent burns, during use, please do not directly touch the suction wire, please hold the shell or use tweezers and other tools to grasp it.

➤Material: ABS + Copper
➤ Usage: this product is suitable for removing excess solder.
➤ Length: 1.5m.
➤ Width: 1.0/1.5/2.0/2.5/3.0/3.5/4.0mm