MinPro I Programmer 24 25 Burner High Speed Programmer USB Motherboard Routing LCD FLASH 24 EEPROM 25 SPI PLASH Chip CP2102

MinPro I Programmer 24 25 Burner High Speed Programmer USB Motherboard Routing LCD FLASH 24 EEPROM 25 SPI PLASH Chip CP2102

$7.34

$7.34 $0.00

Description

SPECIFICATIONS

Application: Computer

Brand Name: EC Buying

Condition: New

Dissipation Power: low

High-concerned chemical: none

Operating Temperature: normal

Origin: Mainland China

Smart Electronics Experiment: Switch And Sensor For Arduino STM32

Supply Voltage: -

Type: Voltage Regulator

is_customized: Yes

Package List:

1: programmer host 1

2: 1 simple patch adapter board

1: Adopt enhanced E8051 core CPU;

2: Integrated USB2.0 transmission ensures the burning speed of the burner;

3: Support 25 SPI PLASH and 24 EEPROM chips;

4: Support 25 SPI FLASH chip automatic identification model;

5: Support data modification;

6: Support batch burning mode, the batch is more worry-free;

7: Support large-capacity chips, supporting up to 512M chips;

8: Support Chinese simplified, Chinese traditional, English interface

9: Support XP WIN7 32/64 bit system;

Burning speed:

We use GD25Q80 as the real test data to ensure the fairness of the test, and compare the same full data file on the same computer.

Minprol erase + burn + test Total time 20 seconds

CH341A erasing + burning + effect Total time 53 seconds

Burning speed far exceeds CH341A programmer

Support chip

Description:

This USB to TTL adapter uses CP2102 main chip, generating virtual serial port after installing driver.

Designed with self-recovery fuse, can effectively protect your downloader and computer USB port in accidental short circuit.

The serial converter supports windows 8.1/7/vista/xp/98, MacOS-X/OS-9, Linux.

Having integrated status indicator and transceiving indicator, the higher the baud rate is, the lower brightness will be.

Designed with male USB connector, 3.3V and 5V voltage output power, can be directly connected to computer USB port.

Specification:

Type: USB to TTL

Chip: CP2102

Support Baud Rate: between 300bps and 1Mbps.

Supported Communication Formats:

1) 5,6,7,8 bits of data;

2) support 1,1.5, 2 stop bits.

3) odd, even, mark, space, none parity

TXD: Transmitting data, must connect to RXD of another equipment for normal communication.

RXD: Receiving data, must connect to TXD of another equipment for normal communication.

TXD always connects to RXD of other equipment for normal communication.

Self-transceivingFor normal communication the RXD connects to TXD of other devices, so if need to receive their own data, directly connect its own RXD and TXD together. It is used to test whether the transmitting and receiving is normal, and is the simplest and the fastest test method first to do when there is a problem.Also known as the loopback test.

Level logic:

TTL level: Data representation usually adopts binary, + 5 v is equivalent to a logic "1", and 0V is equivalent to logic "0", known as the TTL signal system, is the positive logic.

RS232 level: -12V to 3V is equivalent to a logic "0", while +3V to +12V logic level is equivalent to a logic "1", is a negative logic.