SPECIFICATIONS

Note

Height adjusters are not included in any laser modules; they can be purchased separately if needed. Please scroll to the bottom of the details page and click the image to purchase.

HOW TO CHOOSE THE RIGHT MODULE FOR YOUR NEEDS?

NEJE A40630 LASER MODULE
The NEJE A40630 module utilizes a top-tier Nichia light source and features fast-axis compression technology, providing an output optical power exceeding 7W. It offers a smaller focus size, higher light efficiency, and a longer service life compared to traditional 5W modules. The zoom optical design gives the module a very uniform and sharp beam, enabling it to achieve a small focus point and a well-proportioned XY beam shape, whether at near or far focus. The most distinctive feature of this module is its ability to meet the needs of users who require both fine wood engraving and cutting. Additionally, the module is capable of engraving materials such as glass, ceramic, stone, anodized aluminum, and stainless steel, as well as cutting non-woven fabric and cardboard.

NEJE E30LASER MODULE

The NEJE E30 laser module is a super-high-resolution unit with a multi-lens compression technology. It's ideal for ultra-precise engraving at up to 635 DPI on regular flat surfaces and fine cutting of materials under 2mm thick. It can engrave ultra-clear images and drawings on black materials at 1000 mm/s. Also, it supports precise engraving on materials like anodized aluminum, stainless steel, coated glass, ceramics, and transparent acrylic. Output Laser Power: 7W

NEJE E40Ⅱ LASER MODULE

The NEJE E40Ⅱ module, based on the first-generation E40, is specifically designed as a fixed-focus module with an output optical power greater than 10W to meet the needs of both wood engraving and cutting. The E40Ⅱ utilizes sophisticated lens compression technology, and compared to the previous E40, the E40Ⅱ has an increased focal length to adapt to thicker wood cutting while retaining fine engraving capabilities. The E40 module comes with a built-in air protection feature, and without the need for additional air assistance, the module's own cooling system can adequately protect the lens. The E40Ⅱ is also equipped with both cavity-style and needle-style air assistance forms; the needle-style air assistance is not particular about the air source and can be virtually maintenance-free with common woodwork air sources. Of course, the capabilities of the E40Ⅱ extend far beyond woodworking; a multitude of other materials can be quickly engraved and cut.

NEJE A40640Ⅱ LASER MODULE

The NEJE A40640 II is a classic masterpiece from NEJE and can be regarded as the pioneer of semiconductor engraving modules. The A40640 II is highly stable and reliable, lightweight and efficient, with a large user base. It is an extremely versatile module for both engraving and cutting. It features a one-of-a-kind dual fast-axis compression technology, with a 12W optical power output. Thanks to its variable focus design, it offers excellent performance on hard materials like stainless steel, anodized aluminum, and stone, and it can effortlessly cut MDF and wood less than 20mm thick. Even after five years since its launch, the A40640 remains the choice of many professional users.

——NEJE module details——

NEJE A40640 Laser module

Focus: 0.04x0.06mm
Focus method: adjustable ( Recommend 30-55mm )
Optical power: Pulse 12W+, CW 11W
Replaceable lens design: Yes
Stainless steel direct grayscale engraving: Yes
3D hardwood engraving: Yes
Maximum cutting thickness: 20mm
Wavelength: 450nm
Weight: 204g
Module Size: 40x50x85 mm
Input: DC 12V 4A
Interface: 4pin PH2.0
Compatible with: NEJE 3 Max, NEJE 3 Pro, NEJE 3 Plus, NEJE 2s Max, NEJE 2s Plus, etc...
Power control: PWM Power Modulation
Fan: double ball high life fan
Drive: NEJE smart quiet drive, built-in static elimination technology.
Surge protection: Yes
Smart feedback: Yes
Temperature feedback: Yes
Temperature control: 45℃
air pump: 0.5-1.5mpa clean air (Needle type air nozzle supports oily and water-containing air source, and sealed air nozzle can only use clean air pump)
Air interface: 4mm pvc trachea
Original registered brand: Yes
Warranty: 2 years
Warranty Statement: The conditions of NEJE's free after-sale policy must be met under the conditions of non-human disassembly and misoperation and use in the correct environment.
View Manual:https://neje.wiki

NEJE E40 Laser module

Focus: 0.03x0.04mm (10000W/m²)
Focus method: fixed focus( 15mm from the radiator )
Optical power: Pulse 12W+, CW 11W
Compatible: compatible with any 24V or 12V equipment, independent power supply, controlled by ttl 2pin signal of the equipment
Wavelength: 450nm Weight: 280g
Module Size: 40x47.3x127.5 mm
Input: DC 12V 4A
Interface: 4pin PH2.0 + ( 2pin DC12v extra power )
Compatible with: NEJE 3 Max, NEJE 3 Pro, NEJE 2s Max, NEJE 2s Plus, etc...
Power Control: PWM Power Modulation
Fan: Double Ball High Life Fan
Drive: NEJE Smart Quiet Drive, Built-in static elimination technology.
Surge Protection: Yes
Smart Feedback: Yes
Temperature Feedback: Yes
Temperature control: 45℃
Air pump: ACO 328+ air pump, or 30psi+ waterless air pump (used when cutting mdf / leather and higher density materials.Needle type air nozzle supports oily and water-containing air source, and sealed air nozzle can only use clean air pump)
Air interface: 4mm pvc trachea
Protective window lens: Yes ( withstand 1000℃ )
Original registered brand: Yes

NEJE A40630 Laser module

Radiator Size: 40 x 50 x 60 mm
Weight: 204g
Speed of the Fan: 10600RPM(Double ball bearing)
Interface: PH2.0 4Pin
Drive Design: Built-in
Input: 12V 2A +
Optical Power: 7W
Wavelength: 450nm
Laser Class: Class 4
Number of Diodes: 1
Light Source: 1 X LD + FAC Tech + C-Lens
Min Focus Spot: 0.04×0.04mm
PWM Input: VPP(3.3-12V), Recomend 1KHz
Quiet Design: Drive the built-in control ic, judge the working state and adjust the fan work.
Max Cutting & Carving Depth: 18mm (The data is tested by NEJE users, and it needs to be done under more accurate focusing and adding correct and certain strength of air assist.)
Brushed Stainless Steel Carving: Yes
Mirror Stainless Steel Carving: Yes

NEJE E30 Laser module

The NEJE E30 laser module is a super-high-resolution unit with a multi-lens compression technology. It's ideal for ultra-precise engraving at up to 635 DPI on regular flat surfaces and fine cutting of materials under 2mm thick. It can engrave ultra-clear images and drawings on black materials at 1000 mm/s. Also, it supports precise engraving on materials like anodized aluminum, stainless steel, coated glass, ceramics, and transparent acrylic.
Features:
635 DPI ultra-high resolution.
Automatic smoke exhaust without extra air assistance.
Dynamic quieting technology.
1,000°C protected window, easy to maintain.
Specifications:
Supported Voltage: DC 24V & 12V
Maximum Resolution: 635 DPI
Continuous Working: Supported
Temperature Feedback: Supported
Fan Dynamic Silent Technology: Supported
Anti-Static Rating: High
Output Laser Power: 7W

NEJE N30820 Laser module

weight: 209g
Wavelength: 450nm
Optical Output power: 5.5W
Min focus spot size: 0.04*0.04mm
Optical materials: Top-grade Nichia diode
Input: 12V - GND temperature_feedback
Fan material: high speed double ball fan
Fan speed smart control: build in
Fan automatically stop: build in
(Automatically controls fan speed according to temperature to reduce noise.)
Laser Class: Class 4
Antistatic: Yes
Continuously working: Unlimited
Warranty: 2 Years(20000h)

NEJE N30610 Laser module

Module Input:7W
Laser Output Power: 2.5W (2500mW)
Wavelength: 445-450nm
Beam Shape: Dot (Focusable)
Input Voltage: DC 12V
TTL&PWM Modulation: YES, Compatible with Both TTL & PWM Modulation
Input Voltage: DC12V
PWM/TTL Input: DC3.3V-12V
Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)
NOTE
Temperature interface can be disconnected,NEJE provides text instructions for temperature acquisition on the wiki.
Drive Mode:External ACC
Safe temperature range:<70 ℃
Module weight:115g ( The lighter the weight, the smaller the moving inertia, the better the performance )
Life Time:20,000 hours

NEJE B30635 Laser module

NEJE Module 500MW (INPUT about 3500MW)
Heatsink Material: Aircraft Aluminum + Brass Shell
Laser diode:sharp 350mw 5.6mm laser diode (The maximum power 405nm 5.6mm laser diode)
(Real 500mw continuous work)
LD current: 350mA
Luminous Color: Blue
Section Size: 30mm x 30mm
Cooling Mode: 20mm copper core + Heat Sink Groove+ Thermal silicone grease + 10000 rpm cooling fan
Adapter Output Voltage: DC 12V 2A
Can Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum
Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material
Technical Parameters:
Module Input: 3500MW
Laser Output Power: 500MW
Wavelength: 405nm
Beam Shape: Dot (Focusable)
Working Voltage: DC 12V
TTL&PWM Modulation: YES, Compatible with Both TTL & PWM Modulation
Input Voltage: DC12V
PWM/TTL Input: DC3.3V-12V
Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)
NOTE:Temperature interface can be disconnected,NEJE provides text instructions for temperature acquisition on the wiki.
Drive Mode: External ACC
Safe temperature range: <70 ℃
Module weight: 115g ( The lighter the weight, the smaller the moving inertia, the better the performance )
Life Time: 20,000 hours