SPECIFICATIONS

If you want more item, please contact us,we will add the quantity and give you the cheaper price

Notice

8mm 10mm Led button must be connected to the outside resistor when used. Otherwise it will burn out. We will supply resistors

The welding must be completed within 3 seconds, otherwise the inside will be damaged easily

LED color: White Yellow Red Green Blue
If you need other Color led , please feel free to contact customer service and have to note it .

Operation Type :Momentary self-reset

After pressing the button ,press-key will return automatically If you don't continue to press the button。Self-reset.

Operation Type:Latching Fixing

After pressing the button ,press-key stay in a position
until it is pressed again, then it return.

Specification:

Contact:sterling silver
Material: Nickel Brass or aluminium oxide
Color: Silver
Switch Rating: 3A /250VAC
Waterproof Grade: IP65
LED Voltage: 3-6V,12V,24V,220V
Operation Type: Momentary and Latching
Hole size: 8/10/12/16/19/22mm

Voltage Selection

3V-6V :3V 5V 6V
12V-24V: 12V 24V
220V: 220V 230V
Other voltages are required. Please contact customer service
No led switch button can be applied to 2-250V.

Pin Terminal Introduction

"+": positive pole of the led
" - ": negative pole of the led
" NC ": Normal Close
" NO ": Normal Open
" C " : Common
Connect " NO " and " C " : The circuit is alway open unless press the button.
Connect " NC " and " C " : The circuit is alway close unless press the button.

8mm Button

8mm Button (which is momentary and no led ) only has Camber Head. Other 8mm button only has High Head.
8mm Led button must be connected to the outside resistor when used
Please allow 0.1-0.3mm differs due to manual measurement,8mm

10mm High Head Button

10mm Led button must be connected to the outside resistor when used
Please allow 0.1-0.3mm differs due to manual measurement,

12mm Momentary Button

Please allow 0.1-0.3mm differs due to manual measurement,

16mm Flat Head Button

Please allow 0.1-0.3mm differs due to manual measurement,

19mm Flat Head Button

Please allow 0.1-0.3mm differs due to manual measurement,

22mm Flat Head Button

Please allow 0.1-0.3mm differs due to manual measurement,

Wiring Diagram of Normal Open

When the switch is pressed, the LED lights up and the load is energized. After press-key return, the load is de-energized, and the light is off.

Wiring Diagram of Normal Close

The load is energized.When the switch is pressed, the LED lights up and the load is de-energized. After press-key return, the load is energized, and the light is off.